| 金川龙首矿副井返修施工技术实践 |
| |
| 引用本文： | 李立涛,杨志强,高 谦.金川龙首矿副井返修施工技术实践[J].有色金属(矿山部分),2016,68(3):75-78. |
| |
| 作者姓名： | 李立涛 杨志强 高 谦 |
| |
| 作者单位： | (1. 北京科技大学 土木与环境工程学院，北京 100083；2. 金川集团股份有限公司，甘肃 金昌 737100),(1. 北京科技大学 土木与环境工程学院，北京 100083；2. 金川集团股份有限公司，甘肃 金昌 737101),(1. 北京科技大学 土木与环境工程学院，北京 100083；2. 金川集团股份有限公司，甘肃 金昌 737102) |
| |
| 摘 要： | 结合金川龙首矿西二采区副井所处的不良地质环境和采矿技术条件,针对副井严重变形情况,开展了副井返修方案与施工支护工艺研究。提出了井筒和马头门返修处理工艺,确定了1 015~1 240m段的225m井筒整体返修方案。同时,根据围岩稳定性条件,优化锚喷网联合支护型式和工艺参数,并确定了支护顺序与间隔最佳时间。在此基础上,开展返修后的井筒围岩变形监测技术研究。根据监测点所获得井筒和马头门断面变形以及随时间的变化规律,判断返修后井筒的稳定状态,并指导下一步施工方案的调整与优化。该研究为类似条件下的竖井工程返修设计和施工提供参考。
|
| 关 键 词： | 金川 副井工程 返修施工 变形监测 |
| 收稿时间： | 2015/12/9 0:00:00 |
| 修稿时间： | 2015/12/9 0:00:00 |
Repair construction technology practice of auxiliary shaft in Jinchuan Longshou Mine |
| |
| Authors: | LI Litao YANG Zhiqiang and GAO Qian |
| |
| Affiliation: | (1. University of Science and Technology of Beijing, Beijing 100083, China; 2. Jinchuan Group Co., Ltd., Jinchuan Gansu 737100, China),(1. University of Science and Technology of Beijing, Beijing 100083, China; 2. Jinchuan Group Co., Ltd., Jinchuan Gansu 737101, China) and (1. University of Science and Technology of Beijing, Beijing 100083, China; 2. Jinchuan Group Co., Ltd., Jinchuan Gansu 737102, China) |
| |
| Abstract: | Combined with adverse geological conditions and mining technology conditions of auxiliary shaft in the second mining area in west, considering the serious deformation of auxiliary shaft, repair scheme and supporting construction technology are studied. Repair process of shaft and horsehead is provided, and the 225 m of 1 240~1 015 section shaft body repair project is determined. According to stability condition of surrounding rock, optimization of bolting and shotcrete wire parameters, support sequence and optimal time interval are determined. On this basis, monitoring technology of surrounding rock deformation is studied after the repaired shaft. According to the cross section deformation of shaft and horsehead from monitoring point and change law with time, to judge stable state of repair shaft, and to guide the adjustment and optimization of the next construction scheme. This study provides a reference for the similar conditions of engineering design and construction of shaft repair. |
| |
| Keywords: | Jinchuan auxiliary shaft engineering repair project deformation monitoring |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《有色金属(矿山部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(矿山部分)》下载全文 |
|
