Fracture Toughness Anisotropy and Toughening Mechanisms of a Hot-pressed Alumina Reinforced with Silicon Carbide Whiskers

The fracture toughness of a hot-pressed alumina and that of a hot-pressed alumina/SiC-whisker composite containing 33 vol% SiC whiskers were measured by four-point bending on single-edge precracked bend bars having sharp precracks created by "bridge indentation." Two batches of the composite were examined, one exhibiting a greater degree of whisker clustering than the other. The fracture toughness of the alumina was around 4 MN·m^-3/2 whereas that of the composite varied between 5 and 8 MN·m^-3/2 depending on microstructural uniformity and crack-propagation direction. Crack deflection in combination with a change in fracture from intergranular to transgranular fracture is proposed as an explanation of the superior fracture toughness of SiC-whisker-reinforced alumina as compared to unreinforced alumina. The composite exhibited a variation in fracture toughness with the crack-propagation direction in identical crack planes. This effect could with good accuracy be described in terms of crack deflection for the composite with uniform whisker distribution. However, in the material with whisker clustering the variation of the fracture toughness with crack-growth direction was greater and could not entirely be explained by crack deflection.