首页 | 本学科首页   官方微博 | 高级检索  
     

落叶松锯材抗弯强度尺寸效应
引用本文:周海宾,王学顺. 落叶松锯材抗弯强度尺寸效应[J]. 土木与环境工程学报, 2013, 35(1): 117-120
作者姓名:周海宾  王学顺
作者单位:中国林业科学研究院木材工业研究所;北京林业大学理学院
基金项目:国家林业公益性行业科研专项(201104064)
摘    要:以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关系。试验选取1961根6.5、9.0和14.0cm 3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度。利用斜率法和形状参数法确定高、低目测等级组抗弯强度5%分位值的长度与宽度的组合尺寸效应。研究结果表明,斜率法获得高、低目测等级组试件抗弯强度5%分位值的组合尺寸效应分别为0.19和0.23。

关 键 词:落叶松  抗弯强度  尺寸效应  木梁

Size Effect of Bending Strength of Chinese Larch Lumber
Zhou Haibin and Wang Xueshun. Size Effect of Bending Strength of Chinese Larch Lumber[J]. Journal of Civil and Environmental Engineering, 2013, 35(1): 117-120
Authors:Zhou Haibin and Wang Xueshun
Affiliation:1.Research Institute of Wood Industry,Chinese Academy of Forestry,Beijing 100091,P.R.China; 2.College of Science,Beijing Forestry University,Beijing 100083,P.R.China)
Abstract:The relationship between the bending strength and the size of Chinese larch visually-graded lumber was investigated. 1,961 pieces of lumber with three different widths were divided into two groups of high visual grades and low visual grades. The ultimate bending strength was tested under test spans of 18 times test depths. The combined length and width size effects of 5th percentile of bending strength were estimated by the slope method and the parametric method. Using the slope method, the estimated effect parameters of H and L were 0.19 and 0.23 for the 5th percentile.
Keywords:Chinese larch   bending strength   size effect   wood beam
本文献已被 CNKI 等数据库收录!
点击此处可从《土木与环境工程学报》浏览原始摘要信息
点击此处可从《土木与环境工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号