首页 | 本学科首页   官方微博 | 高级检索  
     

等离子弧焊电弧的数值模拟
引用本文:殷凤良,胡绳荪,郑振太,马力.等离子弧焊电弧的数值模拟[J].焊接学报,2006,27(8):51-54.
作者姓名:殷凤良  胡绳荪  郑振太  马力
作者单位:1. 天津大学,材料科学与工程学院,天津,300072
2. 天津大学,材料科学与工程学院,天津,300072;河北工业大学,材料科学与工程学院,天津,300130
摘    要:建立了等离子弧焊静止电弧的三维有限元数学模型,考虑等离子气、保护气的作用,利用ANSYS有限元分析软件对电弧的温度场、速度场、压力以及阳极工件表面的电流密度等进行了数值模拟,并与TIG焊进行了比较.结果表明,由于喷嘴的约束作用,等离子弧焊与TIG焊相比,电弧温度显著提高,焊接电流为150 A时电弧最高温度达到30 000 K.等离子弧焊的另一个显著特点是等离子体流速和电弧压力显著增大.通过计算马赫数、有效粘度和动力粘度之比,认为等离子体电弧处于层流不可压缩状态.

关 键 词:等离子弧焊  电弧  有限元  ANSYS软件  数值模拟
文章编号:0253-360X(2006)08-051-04
收稿时间:07 5 2005 12:00AM
修稿时间:2005-07-05

Numerical analysis of arc in plasma arc welding
YIN Fengliang,HU Shengsun,ZHENG Zhentai and Ma Li.Numerical analysis of arc in plasma arc welding[J].Transactions of The China Welding Institution,2006,27(8):51-54.
Authors:YIN Fengliang  HU Shengsun  ZHENG Zhentai and Ma Li
Affiliation:College of Material Science and Engineering, Tianjin University, Tianjin 300072 China,College of Material Science and Engineering, Tianjin University, Tianjin 300072 China,College of Material Science and Engineering, Tianjin University, Tianjin 300072 China;College of Material Science and Engineering, Hebei Technology University, Tianjin 300130, China and College of Material Science and Engineering, Tianjin University, Tianjin 300072 China
Abstract:Three dimensions finite element mathematical model for the PAW arc was established by considering the effect of plasma gas and shielding gas. The temperature and velocity of the arc were simulated using ANSYS FEA software, as well as the distributions of arc pressure and current density at the anode surface.Compared with the TIG welding arc, the simulated results show that the temperature of the PAW arc is remarkably enhanced. The highest temperature is 30,000K at a current of 150A. The other distinct character of the PAW arc is that the arc velocity and pressure is much higher. The PAW arc can be dealt in a laminar incompressible state judged by the Mach number and the ratio of effective viscosity and dynamic viscosity.
Keywords:PAW  arc  finite element  ANSYS  mathematical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号