首页 | 本学科首页   官方微博 | 高级检索  
     

帘线钢中酸溶铝含量的变化及其对夹杂物的影响
引用本文:陈书浩,王新华,何肖飞,姜敏,黄福祥.帘线钢中酸溶铝含量的变化及其对夹杂物的影响[J].钢铁,2011,46(10):42-47.
作者姓名:陈书浩  王新华  何肖飞  姜敏  黄福祥
作者单位:北京科技大学冶金与生态工程学院, 北京100083
摘    要: 研究了采用LD-RH-LF-CC工艺流程生产帘线钢时,钢中酸溶铝含量的变化情况。研究发现,精炼过程中酸溶铝含量略有下降,但连铸过程中酸溶铝含量急剧下降。夹杂物中Al2O3含量随着酸溶铝含量的上升而逐渐增大。SiO2含量降低时夹杂物熔点提高。采用低碱度、低Al2O3含量的顶渣精炼工艺,严格控制钢中w([Als])在0.0005%~0.001%范围内,促进夹杂物上浮,有利于钢中氧化物夹杂的数量减少、尺寸细小和塑性化。

关 键 词:帘线钢  酸溶铝  顶渣精炼  低熔点区  
收稿时间:2010-12-10

Effect of Acid-Soluble Aluminum on Inclusions in Tyre Cord Steel
CHEN Shu-hao,WANG Xin-hua,HE Xiao-fei,JIANG Min,HUANG Fu-xiang.Effect of Acid-Soluble Aluminum on Inclusions in Tyre Cord Steel[J].Iron & Steel,2011,46(10):42-47.
Authors:CHEN Shu-hao  WANG Xin-hua  HE Xiao-fei  JIANG Min  HUANG Fu-xiang
Affiliation:(School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China)
Abstract:Effect of acid-soluble aluminum on the property of the inclusions during the production process of LD-RH-LF-CC of tyre cord steel was investigated. It is found that Acid-soluble aluminum has a slight decrease trend during the refining process but drops rapidly during the continuous casting process. With the increase of Acid-soluble aluminum content, the Al2O3 content in the inclusions increases while the SiO2 content decrease, meanwhile the melting of inclusions increases. Using top slag with low basicity and low Al2O3 content in the refining process, strictly controlling the Acid-soluble aluminum within a range of 0.0005%-0.001%, as well as promoting floating upward of inclusions, will be benefit for low number and little size and plastification of the inclusions in steel.
Keywords:tyre cord steel  acid-soluble aluminum  top slag refining  low melting point area
本文献已被 万方数据 等数据库收录!
点击此处可从《钢铁》浏览原始摘要信息
点击此处可从《钢铁》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号