| 低速走丝线切割机床脉冲基准信号发生器的研究 |
| |
| 引用本文： | 赵亚利,郭烈恩,杨闪闪.低速走丝线切割机床脉冲基准信号发生器的研究[J].电加工与模具,2009(2). |
| |
| 作者姓名： | 赵亚利 郭烈恩 杨闪闪 |
| |
| 作者单位： | 南昌大学机电学院,江西南昌,330031 |
| |
| 摘 要： | 根据低速走丝线切割机床对脉冲电源的要求,利用单片机和高集成度的可编程逻辑器件(CPLD)的优势,实现了脉宽和脉间连续可调,且频率可达到ns级的脉冲基准信号.
|
| 关 键 词： | 单片机 可编程逻辑器件 脉冲基准信号 |
The Study on Pulse Generator for LSWEDM |
| |
| Zhao Yali,Guo Lieen,Yang Shanshan.The Study on Pulse Generator for LSWEDM[J].Electromachining & Mould,2009(2). |
| |
| Authors: | Zhao Yali Guo Lieen Yang Shanshan |
| |
| Affiliation: | Nanchang University;Nanchang 330031;China |
| |
| Abstract: | This article according to pulse power's request of LSWEDM,has used singlechip and the programmable logical component(CPLD)superiority,realizes that the pulse width and clearance adjust continuously,at the same time,the high frequency pulse standard signal can achieve the ns level. |
| |
| Keywords: | snglechip complex programmable logical device pulse standard signal |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
