首页 | 本学科首页   官方微博 | 高级检索  
     

Li_2ZnTi_3O_8微波介质陶瓷烧结工艺的研究
引用本文:周斌,郑勇,吕学鹏,周伟,赵毅杰. Li_2ZnTi_3O_8微波介质陶瓷烧结工艺的研究[J]. 电子元件与材料, 2012, 0(12): 9-13,17
作者姓名:周斌  郑勇  吕学鹏  周伟  赵毅杰
作者单位:南京航空航天大学材料科学与技术学院
基金项目:国家自然科学基金资助项目(No.51174118)
摘    要:采用传统固相反应法制得Li2ZnTi3O8微波介质陶瓷,研究了主要烧结工艺参数对所制陶瓷的物相组成、显微组织及微波介电性能的影响。结果表明:经900℃预烧并在1 075℃保温4 h所得陶瓷试样只含有单一的Li2ZnTi3O8相;另外,其显微组织均匀,气孔等缺陷较少,相对密度达到98.5%,且具有良好的介电性能:εr=26.6,Q·f=75 563 GHz,τf=–12.4×10–6/℃。

关 键 词:Li2ZnTi3O8  微波介质陶瓷  烧结工艺  介电性能

Study on the sintering process of Li2ZnTi3O8 microwave dielectric ceramics
ZHOU Bin,ZHENG Yong,Lü Xuepeng,ZHOU Wei,ZHAO Yijie. Study on the sintering process of Li2ZnTi3O8 microwave dielectric ceramics[J]. Electronic Components & Materials, 2012, 0(12): 9-13,17
Authors:ZHOU Bin  ZHENG Yong  Lü Xuepeng  ZHOU Wei  ZHAO Yijie
Affiliation:(College of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)
Abstract:Li2ZnTi3O8 microwave dielectric ceramics were synthesized by the traditional solid-state reaction method.The effects of main sintering parameters on the phase composition,microstructure and microwave dielectric properties of the prepared ceramics were investigated.The results show that the ceramic prepared by pre-sintering at 900 ℃ and subsequent sintering at 1075 ℃ for 4 h contains only the Li2ZnTi3O8 phase and shows a uniform microstructure,few defects and a relative density of 98.5%.Moreover,the ceramic shows superior dielectric properties,with a εr value of 26.6,a Q·f value of 75 563 GHz and a τf value of –12.4×10–6/℃.
Keywords:Li2ZnTi3O8  microwave dielectric ceramics  sintering process  dielectric properties
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号