首页 | 本学科首页   官方微博 | 高级检索  
     

一种用于900MHz射频识别(RFID)读写器芯片的1.8VCMOS直接变频接收机
引用本文:谈熙,刘圆,卢磊,袁路,杨振宇,周嘉业,韩科峰,闵昊.一种用于900MHz射频识别(RFID)读写器芯片的1.8VCMOS直接变频接收机[J].半导体学报,2008,29(9).
作者姓名:谈熙  刘圆  卢磊  袁路  杨振宇  周嘉业  韩科峰  闵昊
作者单位:复旦大学专用集成电路及系统国家重点实验室,上海,201203
基金项目:上海市科委资助项目,欧盟BRIDGE项目
摘    要:设计了针对解决900MHz RFID读写器收发机芯片中本地载波干扰问题而优化的直接变频接收机,并在0.18μm 1P6M混合信号CMOS工艺上实现验证.设计中使用了一种串联反馈结构的基带放大器以达到同时实现无源混频器输出缓冲,直流消除以及信号放大的功能.实际测量显示,该接收机的输入1dB压缩点为-4dBm,当中频信号解调信噪比要求为10dB时,可达到的灵敏度为-70dBm.该接收机与整个收发机集成在同一块芯片中,使用1.8V电源电压,工作时静态电流为90mA.

关 键 词:直接变频接收机  直流消除  读写器  射频识别

A 1.8V CMOS Direct Conversion Receiver for a 900MHz RFID Reader Chip
Tan Xi,Liu Yuan,Lu Lei,Yuan Lu,Yang Zhenyu,Zhou Jiaye,Han Kefeng,Min Hao.A 1.8V CMOS Direct Conversion Receiver for a 900MHz RFID Reader Chip[J].Chinese Journal of Semiconductors,2008,29(9).
Authors:Tan Xi  Liu Yuan  Lu Lei  Yuan Lu  Yang Zhenyu  Zhou Jiaye  Han Kefeng  Min Hao
Abstract:A direct conversion receiver with optimized tolerance to local carrier interference is designed and implemented in a 0. 18μm 1P6M mixed-signal CMOS process for a 900MHz RFID reader transceiver. A baseband amplifier with series feedback topology is proposed to achieve passive mixer buffering, baseband DC cancellation, and signal amplification simultaneously. The receiver has a measured input 1dB compression point of - 4dBm and a sensitivity of - 70dBm when 10dB SNR for digital demodulation is required. The receiver is integrated in a reader transceiver chip and consumes 90mA from a 1.8V supply.
Keywords:direct conversion receivers DC cancellations readers RFID
本文献已被 万方数据 等数据库收录!
点击此处可从《半导体学报》浏览原始摘要信息
点击此处可从《半导体学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号