| Abstract: | Labyrinth weirs can increase the flow discharge capacity for a specific head and width by increasing the weir length. This paper studies the flow behavior of labyrinth weirs using Flow-3D® software. The main goal is to evaluate the capability of the response surface methodology (RSM), especially central composite design (CCD), to describe the performance of labyrinth weirs. Traditional and RSM-CCD methodologies are applied using experimental data of previous researchers and numerical data of the present study, respectively. Results show that RSM-CCD can produce an acceptably accurate model for the discharge coefficient of labyrinth weirs with only a small fraction of the data required for the traditional model. In addition, the discharge coefficient of a labyrinth weir decreases by increasing head and decreasing sidewall angle due to the inflow contraction and nappe interference in inlet and outlet cycles, respectively. The discharge efficiency can be up to 4.5 times higher for a labyrinth weir compared to a linear weir. Finally, a new method is introduced for designing labyrinth weirs. |
