| 基于CCP电控单元通用通信模块的开发 |
| |
| 引用本文： | 赵跃华,徐建军,孔峰.基于CCP电控单元通用通信模块的开发[J].计算机工程与设计,2008,29(9):2236-2238. |
| |
| 作者姓名： | 赵跃华 徐建军 孔峰 |
| |
| 作者单位： | 1. 江苏大学,计算机科学与通信工程学院,江苏,镇江,212013
2. 镇江恒驰科技有限公司,江苏,镇江,212009 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 在全面分析CCP的基础上,设计并开发了电控单元的通信模块.将通信模块分成标定协议和CAN驱动两部分,协议实现和硬件底层驱动分离的设计方法保证了通信模块软件在多平台上移植,同时通信模块也更具通用性.软件编写采用模块化编程方法,各个模块相互独立,某个模块出现故障时不会影响其它模块,便于程序的调试和维护,实验结果表明,电控单元和标定工具实时传输数据快,通信可靠性高,为电控单元后续匹配标定打下坚实基础.
|
| 关 键 词： | 标定协议 电控单元 通信模块 标定工具 模块化 |
| 文章编号： | 1000-7024(2008)09-2236-03 |
| 修稿时间： | 2007年5月15日 |
Development of universal communication module for electronic control units based on CCP |
| |
| ZHAO Yue-hua,XU Jian-jun,KONG Feng.Development of universal communication module for electronic control units based on CCP[J].Computer Engineering and Design,2008,29(9):2236-2238. |
| |
| Authors: | ZHAO Yue-hua XU Jian-jun KONG Feng |
| |
| Affiliation: | ZHAO Yue-hua1,XU Jian-jun1,KONG Feng2(1.School of Computer Science , Communication Engineering,Jiangsu University,Zhenjiang 212013,China,2.Zhenjiang Hents Technologies Inc,Zhenjiang 212009,China) |
| |
| Abstract: | Based on thorough analysis of CCP(CAN calibration protocol),the communication module of electrical control unit is designed and developed.The communication module is divided into two parts,including calibration module and CAN driver module.It is guaranteed the communication software transplanted on the multi-platforms by adapting the separation design method between the protocol realization and the hardware drive.The communication module is more universal by applying this method.The modular pro-gramming met... |
| |
| Keywords: | calibration protocol electrical control unit communication module calibration tool modularization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
