首页 | 本学科首页   官方微博 | 高级检索  
     

激光去除光纤涂敷层的实验研究
引用本文:彭仁翔,周次明.激光去除光纤涂敷层的实验研究[J].激光与红外,2006,36(1):35-38.
作者姓名:彭仁翔  周次明
作者单位:武汉理工大学光纤传感技术研究中心,湖北,武汉,430070;武汉理工大学光纤传感技术研究中心,湖北,武汉,430070
摘    要:采用波长为10. 6μm的TEA CO2 红外激光和波长为248nm的KrF准分子激光去除SMF28光纤涂敷层,研究了激光脉冲能量密度和脉冲数与涂敷层去除效果之间的关系。实验 证明,涂敷层去除厚度随激光脉冲能量密度的增加呈对数增长,随红外激光脉冲数的增加呈对数变化,随紫外激光脉冲数的增加呈线性变化,且去除效果在红外激光8.15J / cm2、20个脉冲和紫外激光452mJ / cm2、800个脉冲下达到最佳。

关 键 词:激光剥离  激光去除  激光蒸发  光纤加工
文章编号:1001-5078(2006)01-0035-04
收稿时间:2005-05-21
修稿时间:2005-05-21

Experimental Research on Removing Optical Fiber Coatings with Laser
PENG Ren-xiang,ZHOU Ci-ming.Experimental Research on Removing Optical Fiber Coatings with Laser[J].Laser & Infrared,2006,36(1):35-38.
Authors:PENG Ren-xiang  ZHOU Ci-ming
Affiliation:Fiber Optic Sensing Technology Research Center, Wuhan University of Technology, Wuhan 430070, China
Abstract:TEA CO2 and KrF excimer laser pulses, whose wavelength is 10.61.Lm and 248nm, are used to remove coatings from SMF28 optical fiber. The relationships between laser fluence, the number of pulses and the ablation depth of optical fiber coatings are invest/gated. It is shown that the ablation depth of fiber coatings increases with laser fluence and ultraviolet laser pulse numbers in logarithm way, while mounting with infrared laser pulse numbers linear- ly. There exists an optimum value in 8.15J/cm2, 20 pulses and 452mJ/cm2, 800 pulses using infrared CO2 and ultraviolet excimer laser respectively to obtain the naked fiber.
Keywords:laser stripping  laser ablation  laser steaming  optical fiber processing
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《激光与红外》浏览原始摘要信息
点击此处可从《激光与红外》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号