| 管帽成形模设计 |
| |
| 引用本文： | 周泽清,朱开宏,黄建方,顾柏峰. 管帽成形模设计[J]. 模具工业, 2004, 0(10): 20-21 |
| |
| 作者姓名： | 周泽清 朱开宏 黄建方 顾柏峰 |
| |
| 作者单位： | 中国电子科技集团公司第五十五研究所,江苏,南京,210016 |
| |
| 摘 要： | 介绍了管帽成形模的结构及主要零部件设计。通过采用增加零件工艺凹腔 ,将凸、凹模做成镶拼式 ,顶件器做成分体式等多种方法 ,提高了成形零件的质量 ,解决了原模具使用寿命短等问题
|
| 关 键 词： | 模具结构 镶拼 分体式 |
| 文章编号： | 1001-2168(2004)10-0020-02 |
| 修稿时间： | 2004-02-02 |
Design of the Die for Forming Pipe Caps |
| |
| ZHOU Ze-qing,ZHU Kai-hong,HUANG Jian-fang,GU Bai-feng. Design of the Die for Forming Pipe Caps[J]. Die & Mould Industry, 2004, 0(10): 20-21 |
| |
| Authors: | ZHOU Ze-qing ZHU Kai-hong HUANG Jian-fang GU Bai-feng |
| |
| Abstract: | The design of the structure and main parts of the die for forming the pipe caps is introduced. With a technological concave cavity added to the pipe cap, split structure used for the punch and die and separated-body structure used for the kicker, the quality of the formed pipe caps has been improved and the problem of short service life of the former die has been sovled. |
| |
| Keywords: | die structure splice separated-body type. |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
