| 柱撑粘土在加氢脱硫中的应用研究 |
| |
| 引用本文： | 于廷云,张园园. 柱撑粘土在加氢脱硫中的应用研究[J]. 化工科技, 2012, 20(1): 34-36 |
| |
| 作者姓名： | 于廷云 张园园 |
| |
| 作者单位： | 辽宁石油化工大学化学与材料科学学院,辽宁抚顺,113001 |
| |
| 摘 要： | 以柱撑粘土为载体，制备了Mo-Ni／A1-Fe-PILC和Mo—Ni／AbPILC加氢脱硫催化剂，在50m愀型固定床反应评价装置中对FCC汽油进行加氢脱硫研究。结果表明：Mo-Ni／A1-Fe-PILC和Mo-Ni／A1-PILC2种催化剂具有较好的加氢脱硫效果，脱硫率达到75％以上，最佳的工艺条件为反应温度340℃，反应压力6．0MPa，空速为4．0h-1。
|
| 关 键 词： | 柱撑粘土 加氢脱硫 FCC汽油 脱硫率 加氢工艺 |
Study on the application of PILC in hydrodesulfurization |
| |
| YU Ting-yun , ZHANG Yuan-yuan. Study on the application of PILC in hydrodesulfurization[J]. Science & Technology In Chemical Industry, 2012, 20(1): 34-36 |
| |
| Authors: | YU Ting-yun ZHANG Yuan-yuan |
| |
| Affiliation: | (College of Chemical and Materials Science,Liaoning SHIHUA University,Fushun 113001,China) |
| |
| Abstract: | Mo-Ni/Al-Fe-PILC and Mo-Ni/Al-PILC hydrodesulfurization catalysts were prepared by PILC used as the carrier and the catalyst effect was evaluated in 50 mL fixed-bed reactor,for the FCC gasoline hydrodesulfurization.The results showed that Mo-Ni/Al-Fe-PILC and Mo-Ni/Al-PILC had good hydrodesulfurization effect,the desulphurization rate reached more than 75%,the optimum technological conditions for the reaction were as follows:temperature 340 ℃,reaction pressure 6.0 MPa,airspeed 4.0 h-1. |
| |
| Keywords: | PILC Hydrodesulfurization The FCC gasoline Desulphurization rate Hydrogenation process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
