Herstellung und Eigenschaften stickstofflegierter,korrosionsbeständiger Stähle und Sonderstähle mit niedrigen Kohlenstoffgehalten

Production and properties of nitrogen alloyed, corrosion resistant steels and special steels with low carbon contents Alloying with nitrogen has favourable influence in particular on the mechanical properties of CrNiMo steels (X 2 CrNiMoN 17 12, materials No. 1.4406, X 2 CrNiMoN 17 13 5, materials No. 1.4439 und X 2 CrNiMoN 22 5, materials No. W.-Nr. 1.4462). This comes to bear when ambient temperature and low temperature strength and toughness are concerned. With respect to the corrosion behaviour the data concerning the effect of nitrogen are contradictory. It has become clear that nitrogen improves pitting corrosion resistance; this applies, however, only to pit initiation but not to pit growth. Stress corrosion cracking is not delayed by nitrogen but different results have been obtained with different media: while the duplex steel X 2 CrNiMoN 22 5 is attacked considerably faster than the corresponding nitrogen-free steel in 42% boiling magnesium chloride solution the time-to-failure of both steels are comparable in 30% boiling MgCl₂-solution. The nitrogen alloyed steels can be welded by all known welding procedures, provided fully austenitic welding rods are used.