| 熔融共混法制备POE/PP热塑性弹性体 |
| |
| 引用本文： | 孙阿彬,陈焕江,周琦,邱桂学. 熔融共混法制备POE/PP热塑性弹性体[J]. 特种橡胶制品, 2006, 27(2): 22-25 |
| |
| 作者姓名： | 孙阿彬 陈焕江 周琦 邱桂学 |
| |
| 作者单位： | 青岛科技大学,橡塑材料与工程教育部重点实验室,青岛,266042 |
| |
| 摘 要： | 用熔融共混法制得了聚烯烃类弹性体（POE）／PP共混体系，研究了不同橡塑比对体系力学性能的影响；考察了不同填料（CaCO3，滑石粉．炭黑）对POE／PP复合材料性能的影响。结果表明：在共混比为60／40-70／30时，体系的综合性能较佳。加入的填料均使材料的拉伸强度和拉断伸长率下降，硬度上升。
|
| 关 键 词： | 熔融共混 橡塑比 填充剂 |
| 文章编号： | 1005-4030(2006)02-0022-03 |
| 收稿时间： | 2005-12-02 |
| 修稿时间： | 2005-12-02 |
Preparation of POE/PP Thermoplastic Elastomers through Melt Blending |
| |
| SUN A-bin,CHENG Huan-jiang,ZHOU Qi,QIU Gui-xue. Preparation of POE/PP Thermoplastic Elastomers through Melt Blending[J]. Special Purpose Rubber Products, 2006, 27(2): 22-25 |
| |
| Authors: | SUN A-bin CHENG Huan-jiang ZHOU Qi QIU Gui-xue |
| |
| Affiliation: | Qingdao University of Science and Technology, Qingdao 266042,China |
| |
| Abstract: | The POE/PP composite was made through melt blending.The effect of the ratio of rubber and plastics,as well as different fillers(CaCO_3,talcum powder,carbon black) on mechanical properties of POE/PP was studied.The results showed that the optimal mechanical properties of POE/PP was obtained when the rate of rubber and plastics was between 60/40 and 70/30.The tensile strength and elongation at break were decreased with increasing the loading of the fillers while the hardness was increased. |
| |
| Keywords: | POE/PP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
