| 基于正交试验的注射成型工艺参数优化方法研究 |
| |
| 引用本文： | 胡勇,谢文玲,王佳. 基于正交试验的注射成型工艺参数优化方法研究[J]. 模具工业, 2010, 36(6): 6-9,13 |
| |
| 作者姓名： | 胡勇 谢文玲 王佳 |
| |
| 作者单位： | 四川理工学院,过程装备与控制工程四川省高校重点实验室,四川,自贡,643000 |
| |
| 基金项目： | 过程装备与控制工程四川省高校重点实验室开放基金项目 |
| |
| 摘 要： | 结合正交试验法和注射模拟分析软件Moldflow,对注射成型工艺参数进行优化。为获取优化的注射工艺参数组合,设计了试验方案,并对Moldflow模拟试验结果进行了极差、方差分析法处理,确定了各因素及其交互作用的主次顺序、因素之间交互作用对试验指标影响的显著程度,分析了各因素与试验指标之间的关系,得出了试验因素的最优水平和试验范围内的最优组合,即注射工艺参数组合方案,并对该工艺组合方案进行模拟和实际验证。这一研究方法对注射工艺分析与模具设计具有指导意义。
|
| 关 键 词： | 正交试验 Moldflow 数据分析 工艺参数优化 |
Optimization of injection molding process parameters based on orthogonal experiment |
| |
| HU Yong,XIE Wen-ling,WANG Jia. Optimization of injection molding process parameters based on orthogonal experiment[J]. Die & Mould Industry, 2010, 36(6): 6-9,13 |
| |
| Authors: | HU Yong XIE Wen-ling WANG Jia |
| |
| Affiliation: | HU Yong,XIE Wen-ling,WANG Jia(Sichuan Provincial Key Laboratory of Process Equipment and Control,Sichuan University of Science & Engineering,Zigong,Sichuan 643000,China) |
| |
| Abstract: | Injection molding process parameters were optimized by Moldflow analysis software and orthogonal test method.The test program was designed for obtaining optimal injection molding process parameters.The simulation results were studied by applying range analysis and variance analysis;the importance order among various factors and their interaction were decided.After analyzing the relation between the factors and test indexes,an optimal combination of injection molding process parameters within the test range ... |
| |
| Keywords: | Moldflow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
