| 挖掘机动态力学仿真 |
| |
| 引用本文： | 朱永强,高利,张平霞. 挖掘机动态力学仿真[J]. 煤矿机械, 2007, 28(9): 53-55 |
| |
| 作者姓名： | 朱永强 高利 张平霞 |
| |
| 作者单位： | 北京理工大学,机械与车辆工程学院,北京,100081;青岛理工大学(黄岛校区)汽车与交通学院,山东,青岛,266520;北京理工大学,机械与车辆工程学院,北京,100081;青岛理工大学(黄岛校区)汽车与交通学院,山东,青岛,266520 |
| |
| 摘 要： | 为方便挖掘机设计中受力分析,便于液压缸选取,提出利用SolidWorks进行模型设计,采用COSMOSMotion进行动态仿真,得到液压缸受力变化曲线,找到最大受力位置状态,以此为依据选取液压缸,缩短了设计周期。
|
| 关 键 词： | 挖掘机 动态仿真 力学分析 液压缸 |
| 文章编号： | 1003-0794（2007）09-0053-03 |
| 修稿时间： | 2007-03-30 |
Dynamic Mechanics Simulation of Navvy |
| |
| ZHU Yong-qiang,GAO Li,ZHANG Ping-xia. Dynamic Mechanics Simulation of Navvy[J]. Coal Mine Machinery, 2007, 28(9): 53-55 |
| |
| Authors: | ZHU Yong-qiang GAO Li ZHANG Ping-xia |
| |
| Affiliation: | 1. College of Mechanism and Vehicle Engineering, Beijing Institute of Technology, Beijing 100081, China; 2. College of Automobile and Traffic, Qingdao Technological University, Qingdao 266520, China |
| |
| Abstract: | In order to make mechanics in navvy design easy to be analysed, and make hydraulic pressure vat easy to be selected, a kind of method was advanced that the model was designed with Solidworks. Then, the dynamic simulation was proceeded with COSMOSMotion, and hydraulic pressure vat thrust curve was drawn. After the position of maximum of vat thrust was found, the hydraulic pressure vat was easily selected, and the design cycle was reduced. |
| |
| Keywords: | navvy dynamic simulation mechanics analysis hydraulic pressure vat |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
