Study on the mechanical properties of porous tin oxide |
| |
| Affiliation: | 1. School of Materials Science and Engineering, Kookmin University, 77 Jeongneung-ro, Seongbuk-gu, Seoul 02707, Republic of Korea;2. Army Research Laboratory, RDRL-SED-C, 2800 Powder Mill Road, Adelphi, MD 20783, USA;3. Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109, USA;4. Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109, USA;1. Tokyo Institute of Technology, Kanagawa, Japan;2. ETH Zürich, Zürich, Switzerland;3. JEOL Ltd., Tokyo, Japan;4. National Institute of Physiological Science, Aichi, Japan;5. Sokendai, Kanagawa, Japan;6. Terabase Inc., Aichi, Japan;1. School of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdan-gwagiro, Buk-gu, Gwangju 500-712, Republic of Korea;2. Fraunhofer Institute for Solar Energy System (ISE), Heidenhofstrasse 2, 79110 Freiburg, Germany;3. Nonproliferation System Research Division, Korea Atomic Energy Research Institute (KAERI), 989-111 Daedeok-daero, Yuseong-gu, Daejeon, Republic of Korea;4. Department of Environmental Engineering, Sangmyung University, 300 Anseo-dong, Dongnam-gu, Cheonan-si, Chungnam Province 330-720, Republic of Korea;1. Department of Microsystems Engineering - IMTEK, University of Freiburg, Freiburg, Germany;2. Robert Bosch (South East Asia) Pte Ltd, Corporate Research, Singapore;3. Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg, Germany;1. Department of Industrial Engineering, University of Padova, via Marzolo 9, 35131 Padova, Italy;2. Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, USA |
| |
| Abstract: | Despite the importance of tin oxide (SnO2) in diverse functional applications, little information is available on the mechanical properties of bulk or porous SnO2. In this study, porous SnO2 was synthesized using an ice-templating method to produce a “dual” pore structure that comprises large wall pores (on the order of several micrometers) with small micropores (~2 µm) on their surfaces. The Vickers hardness decreased with increasing porosity and increased with increasing contiguity of struts. The compressive stress–strain curves of porous SnO2 samples with porosity ranging from 48% to 73% were compared with both the Gibson–Ashby and the cellular-lattice-structure-in-square-orientation models, which generally represent the “lower” and “upper” bounds of yield strength for porous materials, respectively. As expected, the yield strength of the porous SnO2 samples decreased with increasing porosity, and all the yield-strength values of porous SnO2 fell between the two extreme prediction models. The sample with the lowest porosity of 48% exhibited sharply increasing elastic behavior followed by sudden rupture, as generally reported for bulk ceramics; however, the other samples with higher porosities ranging from 50% to 73% exhibited “porous-metal-like” behavior at strains of 15% or greater as a result of the fracturing of the solid walls between the pores. |
| |
| Keywords: | C Mechanical properties A sintering B porosity E sensors Tin oxide |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
