首页 | 本学科首页   官方微博 | 高级检索  
     

全氟己酮灭火剂热裂解产生氟化氢研究
引用本文:陈培瑶,庄爽,刘琦,李姝,刘慧敏.全氟己酮灭火剂热裂解产生氟化氢研究[J].消防科学与技术,2020,39(9):1277-1279.
作者姓名:陈培瑶  庄爽  刘琦  李姝  刘慧敏
作者单位:应急管理部天津消防研究所,天津300381
基金项目:应急管理部消防救援局应用创新项目(2017XFCX13)
摘    要:通过管式裂解炉模拟全氟己酮灭火剂受高温裂解产生HF 的行为,研究影响HF 产生的条件,对比研究不同生产工艺的全氟己酮灭火剂以及其他氟代烃气体灭火剂热裂解产生HF 的情况。随着温度升高、停留时间加大,全氟己酮产生HF 的比重增大,不同生产工艺的全氟己酮裂解产生HF 的水平相当。与其他氢氟烃灭火剂相比,全氟己酮灭火剂热裂解初始温度低(500 ℃),在中低温区(550~750 ℃)裂解产生HF 比例高。

关 键 词:全氟己酮  热裂解  氟化氢  

Study on the generation of hydrogen fluoride by thermal decomposition of C6F-ketone extinguishing agent
CHEN Pei-yao,ZHUANG Shuang,LIU Qi,LI Shu,LIU Hui-min.Study on the generation of hydrogen fluoride by thermal decomposition of C6F-ketone extinguishing agent[J].Fire Science and Technology,2020,39(9):1277-1279.
Authors:CHEN Pei-yao  ZHUANG Shuang  LIU Qi  LI Shu  LIU Hui-min
Affiliation:Tianjin Fire Science and Technology Research Institute of MEM,Tianjin 300381, China)
Abstract:Pyrolysis behaviors of C6F-ketone were simulated using a tube cracking furnace and the factors influence HF generation were studied. HF generation by C6F- ketone extinguishing agents from different production processes were compared, then HF generation was compared with C6F-ketone and other HFCs. The share of HF generated from thermal decomposition increased with decomposition temperature and residence time. The HF generation of C6F-ketone from differnt production technology were mostly the same. Compared with other HFCs, initial cracking temperature of C6F- ketone was lower(500 ℃ ), more HF was generated at low and moderate temperatures(550~750 ℃).
Keywords:C6F-ketone  thermal decomposition  hydrogen fluoride  
点击此处可从《消防科学与技术》浏览原始摘要信息
点击此处可从《消防科学与技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号