首页 | 本学科首页   官方微博 | 高级检索  
     

一种栅型结构微机械陀螺的研究
引用本文:熊斌,车录锋,王跃林. 一种栅型结构微机械陀螺的研究[J]. 中国机械工程, 2003, 14(3): 184-186
作者姓名:熊斌  车录锋  王跃林
作者单位:中国科学院上海微系统与信息技术研究所传感技术国家重点实验室,上海市,200050
基金项目:国家重点基础研究发展规划资助项目 (G19990 3 3 10 1)
摘    要:介绍了一种新型结构微机械陀螺的设计及制作。新型陀螺的驱动振动和敏感检测振动的阻尼均为滑膜阻尼,且几乎相同,惯性质量块为栅型结构,由弹性悬臂梁支撑,驱动固定电极和敏感检测固定电极位于惯性质量块下方。分析了新型陀螺的工作特性,说明了陀螺结构参数对陀螺灵敏度的影响,实验结果表明,大气状态下,新型栅结构微机械陀螺的驱动和敏感检测品质因子Q均可达到66。

关 键 词:栅型结构 微机械陀螺 动力学方程 角速度传感器 微机械加工技术
文章编号:1004-132X(2003)03-0184-03

Study on a Silicon Micromachined Gyroscope with Fence Structure
Xiong Bin. Study on a Silicon Micromachined Gyroscope with Fence Structure[J]. China Mechanical Engineering, 2003, 14(3): 184-186
Authors:Xiong Bin
Abstract:A novel gyroscope with the same Q-factor of detected mode and driven mode was designed. The device structure which we called "fence gyro" consists of a proof mass with bars linked up to substrate by suspend springs. The fixed interdigitated-driving electrodes and interdigitated-sensing electrodes under the proof mass are located on substrate. The characteristic on the gyro was analyzed. The calculated results show the effect of the structure parameters of the gyro on the sensitivity of the gyro. The experimental results show that the device has its Q-factor of detected mode and driven mode in almost same order of 66 at atmospheric pressure.
Keywords:silicon micromachined gyroscope dynamics equation angular rate sensor micromachined technology
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号