减二线馏分油生产橡胶增塑剂A0709的工艺研究 |
| |
引用本文: | 冯涛,于恩强,刘洪安,殷春照,李军.减二线馏分油生产橡胶增塑剂A0709的工艺研究[J].石油炼制与化工,2018,49(7):34-36. |
| |
作者姓名: | 冯涛 于恩强 刘洪安 殷春照 李军 |
| |
作者单位: | 中海沥青股份有限公司 |
| |
摘 要: | 以环烷基SZ36-1减二线馏分油为原料,通过加氢脱酸-溶剂精制-白土精制组合工艺,制备橡胶增塑剂A0709,并对工艺条件进行优化研究。结果表明:SZ36-1减二线馏分油通过该组合工艺制备的橡胶增塑剂A0709,产品收率达到74.1%,芳碳率(CA值)达11.2%,满足GB/T 33322-2016《橡胶增塑剂 芳香基矿物油》各项指标要求。
|
关 键 词: | 减二线馏分油 橡胶增塑剂 生产工艺 |
收稿时间: | 2017-11-30 |
修稿时间: | 2017-12-27 |
PRODUCTION OF RUBBER PLASTICIZER A0709 FROM SECOND SIDE STREAM OF VACUUM DISTILLATION |
| |
Abstract: | The rubber plasticizer A0709 derived from the 2nd side stream of vacuum distillation of SZ36-1 naphthenic-base crude was prepared by a combined process of hydrodeacidification-solvent refining-clay refining. The process conditions were optimized. The results showed that by the combined technology, the rubber plasticizer A0709 can be produced and reach the GB/T 33322 standard. Under the optimized process conditions, the product yield is up to 74.1% and the CA% is 11.2%. |
| |
Keywords: | 2nd line vacuum distillate rubber plasticizer production process |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《石油炼制与化工》浏览原始摘要信息 |
|
点击此处可从《石油炼制与化工》下载全文 |
|