| 点滴瓶瓶塞注射模具设计 |
| |
| 引用本文： | 孙先明,郑新建,单忠德,胡凡建,尚艳忠.点滴瓶瓶塞注射模具设计[J].武汉化工学院学报,2005,27(4):78-80. |
| |
| 作者姓名： | 孙先明 郑新建 单忠德 胡凡建 尚艳忠 |
| |
| 作者单位： | [1]武汉化工学院材料科学与工程学院,湖北武汉430074 [2]湖北工业大学机械工程学院,湖北武汉430068 [3]机械科学研究院,北京100044 |
| |
| 基金项目： | 国家自然科学基金资助项目（50305009） |
| |
| 摘 要： | 在分析点滴瓶瓶塞零件结构的基础上，完成了注射模具结构设计，对其浇注系统与潜伏式浇口做了介绍，经过优化设计避免了瓶塞生产中易出现熔接痕、内部气孔、注不满、变形的缺陷，成功生产出合格制品．
|
| 关 键 词： | 瓶塞 注射模具 潜伏式浇口 |
| 文章编号： | 1004-4736(2005)04-0078-03 |
| 收稿时间： | 2005-05-13 |
| 修稿时间： | 2005年5月13日 |
Design of the injection mould for the bung of dropping bottle |
| |
| Sun XianMing;Zheng XinJian;Chan ZhongDe;Hu FanJian;Shang YanZhong.Design of the injection mould for the bung of dropping bottle[J].Journal of Wuhan Institute of Chemical Technology,2005,27(4):78-80. |
| |
| Authors: | Sun XianMing;Zheng XinJian;Chan ZhongDe;Hu FanJian;Shang YanZhong |
| |
| Abstract: | The injection mould structure design has been finished on the basis of the analysis of the structure of the bottle bung. The paper gave an introduction to the design of the injection mechanism and deeding system. Through the optimization design, the bottle bung has been prevented from producing and hitting the defect apt to appear,such as weld mark ,internal porosity,short shot ,and deformation,etc. The acceptable bottle bung has been producde successfully. |
| |
| Keywords: | the bung of dropping bottle injection mould submarine gate |
| 本文献已被 CNKI 维普 等数据库收录！ |
