The effects of surface-modified graphene nanoplatelets on the sliding wear properties of basalt fibers-reinforced epoxy composites |
| |
Authors: | Elaheh Kazemi-Khasragh Farid Bahari-Sambran Seyed Mohammad Hossein Siadati Reza Eslami-Farsani Shabnam Arbab Chirani |
| |
Affiliation: | 1. K. N. Toosi University of Technology, Faculty of Materials Science and Engineering, No. 7, Pardis St., Mollasadra Avenue, Vanak Sq., Tehran, Iran;2. ENI Brest, FRE CNRS 3744, IRDL, Brest, France |
| |
Abstract: | Possessing unique designs and properties absent in conventional materials, nanocomposites have made a remarkable imprint in science and technology. This is particularly true regarding the polymer matrix composites when they are further reinforced with nanoparticles. In this study, the effects of different weight percentages (0, 0.1, 0.2, 0.3, 0.4, and 0.5) of surface-modified graphene nanoplatelets (GNPs) on the microhardness and wear properties of basalt fibers/epoxy composites were investigated. The GNPs were surface modified by silane, and the composites were made by the hand lay-up method. The wear tests were conducted under two different loads of 20 and 40 N. The best wear properties were achieved at 0.3 wt % GNPs as a result of the GNPs' self-lubrication property and the formation of a stable transfer/lubricating film at the pin and disk interface. Moreover, the friction coefficient was lower at the higher normal load of 40 N. The microscopic studies by FESEM and SEM showed that the presence of GNPs up to 0.3 wt % led to the stability of the transfer/lubricating film by enhancing the adhesion of the basalt fibers to the epoxy resin. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47986. |
| |
Keywords: | basalt fibers graphene nanoplatelets polymer matrix nanocomposites wear properties |
|
|