首页 | 本学科首页   官方微博 | 高级检索  
     

有杆泵井管杆偏磨腐蚀试验研究
引用本文:李林,王旱祥,周乐平,付倩倩.有杆泵井管杆偏磨腐蚀试验研究[J].润滑与密封,2009,34(2).
作者姓名:李林  王旱祥  周乐平  付倩倩
作者单位:中国石油大学(华东)机电工程学院,山东东营,257061
基金项目:中国石化有限公司胜利油田分公司项目 
摘    要:利用摩擦磨损试验机,对N80、J55两种油管材料与45#钢、35CrMo和20CrMo 3种抽油杆材料配对后在不同矿化度油井污水、温度下进行了摩擦磨损腐蚀试验.结果表明:在低温、低矿化度污水中,管杆磨蚀量相差不大,磨蚀效果不明显;污水矿化度对配对管杆磨蚀影响显著,而在同等污水条件下,磨蚀量随温度的升高略呈上升趋势;从整体来看,35CrMo/J55配对在各条件下的磨蚀量均较小,是较理想的摩擦副.

关 键 词:偏磨  油管  抽油杆

Experimental Reserch on Eccentric Wear Corrosion of Tube and Rod in the Pumping Wells
Li Lin,Wang Hanxiang,Zhou Leping,Fu Qianqian.Experimental Reserch on Eccentric Wear Corrosion of Tube and Rod in the Pumping Wells[J].Lubrication Engineering,2009,34(2).
Authors:Li Lin  Wang Hanxiang  Zhou Leping  Fu Qianqian
Abstract:By use of friction and wear testing machine,the corrosive wear experiments on five kinds of tube and rod materials were carried out in different sewage and temperature conditions.The results show that the corrosive wear is similar in low temperature and low salinity conditions,the sewage salinity has a great impact on corrosive wear,the erosion loss has a slight increase with the temperature rising.In general,the erosion loss of 35CrMo/J55 pair in all kinds of conditions is less than that of other friction ...
Keywords:eccentric wear  oil tube  pumping rod  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号