| 3Cr2W8V模具钢预处理工艺的改进 |
| |
| 引用本文： | 隋少华,宋天革,赵洪运.3Cr2W8V模具钢预处理工艺的改进[J].金属热处理,2007,32(1):66-68. |
| |
| 作者姓名： | 隋少华 宋天革 赵洪运 |
| |
| 作者单位： | 哈尔滨工业大学,材料科学与工程学院,山东,威海,264209;无锡职业技术学院,机械与汽车工程系,江苏,无锡,214121 |
| |
| 摘 要： | 采用快速预冷退火工艺取代传统退火工艺,对3Cr2W8V热作模具钢进行了预处理.结果表明,新工艺通过增加过冷度,提高了球化速度,球化时间仅为传统工艺的1/6,而且碳化物颗粒细小均匀、球化效果好、硬度适当;经淬火处理后,组织中碳化物颗粒分布也更加细小均匀,淬火硬度也要高于传统退火处理后的淬火硬度.
|
| 关 键 词： | 3Cr2W8V钢 快速预冷 球化退火 碳化物 |
| 文章编号： | 0254-6051（2007）01-0066-03 |
| 修稿时间： | 2006-08-01 |
Improvement of Pretreatment Process for 3Cr2W8V Die Steel |
| |
| SUI Shao-hua,SONG Tian-ge,ZHAO Hong-yun.Improvement of Pretreatment Process for 3Cr2W8V Die Steel[J].Heat Treatment of Metals,2007,32(1):66-68. |
| |
| Authors: | SUI Shao-hua SONG Tian-ge ZHAO Hong-yun |
| |
| Affiliation: | 1. Department of Materials Science and Engineering, Harbin Institute of Technology, Weihai Shandong 264209, China;2. Department of Mechanical and Automotive Engineering, Wuxi Institute of Technology, Wuxi Jiangsu 214121, China |
| |
| Abstract: | 3Cr2W8V hot work die steel was pretreated by rapid precooling annealing process instead of traditional annealing process. The results show that rapid precooling process can increase the degree of undercooling of the steel and promote carbides spheroidizing. It can enormously shorten the annealing time which is only 1/6 of the traditional annealing process,get fine and well distributed carbides. After quenching, the microstructure of 3Cr2W8V steel is improved, the martensite is much finer and the hardness is higher than that of being pretreated by traditional annealing process. |
| |
| Keywords: | 3Cr2WSV steel rapid precooling spheroidizing annealing carbides |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
