| 模具结构对齿轮成形性能的影响 |
| |
| 引用本文： | 程羽,陈德礼,李刚,臧顺来,邢光汉. 模具结构对齿轮成形性能的影响[J]. 塑性工程学报, 2003, 10(6): 59-61 |
| |
| 作者姓名： | 程羽 陈德礼 李刚 臧顺来 邢光汉 |
| |
| 作者单位： | 西安交通大学,机械工程学院,西安,710049 |
| |
| 基金项目： | 西安交通大学科学研究基金资助项目 |
| |
| 摘 要： | 研究了直齿圆柱齿轮的冷精锻过程 ,详细分析了模具结构对齿轮成形的影响。结果显示 ,增加适当高度的镶件对大模数、高厚度的圆柱直齿轮齿腔填充比较有利 ,增加芯棒可以降低齿轮成形载荷 ,但单位面积的成形力并未减少 ,且对齿轮的填充性影响不大。
|
| 关 键 词： | 直齿圆柱齿轮 冷精锻 成形工艺 |
| 文章编号： | 1007-2012(2003)06-0059-03 |
| 修稿时间： | 2003-03-10 |
The influence of the die structure on spur gears forming |
| |
| CHEGN Yu CHEN De-li LI Gang ZANG Shun-lai XIN Guang-han. The influence of the die structure on spur gears forming[J]. Journal of Plasticity Engineering, 2003, 10(6): 59-61 |
| |
| Authors: | CHEGN Yu CHEN De-li LI Gang ZANG Shun-lai XIN Guang-han |
| |
| Abstract: | In this paper, the cold precise forging of spur gear s is researched, particularly the influence of die structure on gears forming is a nalyzed. The result presents, it is relatively useful for filling in the tooth c avity of big modulus?high thickness spur increase to increase suitability heigh t mount piece, and the load of forging spur gears can be decreased by adding a m andrel , but unit area forging force does not cut down, and it has a little infl uence on filling in the tooth cavity. |
| |
| Keywords: | spur gear cold precise forging forming process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
