首页 | 本学科首页   官方微博 | 高级检索  
     

扩散渗析法处理高铜含砷废水工艺研究
引用本文:张佳峰,张宝,钟胜奎. 扩散渗析法处理高铜含砷废水工艺研究[J]. 铜业工程, 2008, 0(1): 25-28
作者姓名:张佳峰  张宝  钟胜奎
作者单位:1. 中南大学冶金科学与工程学院,湖南,长沙,410083
2. 桂林工学院材料与化学系,广西,桂林,541004
摘    要:采用扩散渗析技术对高铜含砷废水进行了铜砷分离,研究了静置时间、进水酸度、水流速、料流速和水流速与料流速之比对铜砷分离的影响。研究结果表明,静置时间为2h,进水酸度为5g/L,水流速为450mL/h,料流速为400mL/h,水流速与料流速的比值为450/400时,铜、砷综合分离效果最好。铜的分离率为92.65%,砷的分离率为50.21%。

关 键 词:铜砷分离  高铜含砷废水  扩散渗析

Study on Treatment of Wastewater Containing High Copper and Arsenic by Diffusion Dialysis Process
ZHANG Jia-feng,ZHANG Bao,ZHONG Sheng-kui. Study on Treatment of Wastewater Containing High Copper and Arsenic by Diffusion Dialysis Process[J]. Copper Engineering, 2008, 0(1): 25-28
Authors:ZHANG Jia-feng  ZHANG Bao  ZHONG Sheng-kui
Affiliation:ZHANG Jia - feng,ZHANG Bao ,ZHONG Sheng - kui ( 1. Metallurgy Science and Engineering Institute of Central South University,Changsha410083, china; 2. Material and Chemical Dept. of Guilin Institute, Guilin541004 , Guangxi, China)
Abstract:Using diffusion dialysis technology to separate copper and arsenic from wastewater with high copper and arsenic, and made some studies on the ratio which standing time, influent acidity, the water flow velocity, the material flow velocity to the ratio of water flow velocity and material flow velocity to ratio of separation of copper and arsenic. Study shows that standing time of 2h, inlet water acidity of 5 g/L, water flow rate of 450 ml/h, material flow rate of 400 ml/h, the water velocity and the ratio of information flow for the 450/400, the total ratio of separation is best. The separation ratio of copper is 92.65% and the arsenic is 50.21%.
Keywords:separation of copper and arsenic  wastewater containing high concentration of copper and arsenic  diffusion dialysis
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号