| 半固态连接不锈钢-铝合金界面断裂性能分析 |
| |
| 引用本文： | 刘洪伟,郭成,程羽,刘旭峰,邵光杰. 半固态连接不锈钢-铝合金界面断裂性能分析[J]. 材料科学与工程学报, 2007, 25(2): 172-174 |
| |
| 作者姓名： | 刘洪伟 郭成 程羽 刘旭峰 邵光杰 |
| |
| 作者单位： | 1. 西安交通大学,机械工程学院,陕西,西安,710049
2. 上海大学,上海汽车金属材料研究中心,上海,200072 |
| |
| 摘 要： | 采用半固态连接技术制备了不锈钢-铝合金双金属材料,参照ASTM-E813标准,对这种双金属材料界面断裂行为进行了试验及数值分析,以KIC为评价指标,对不锈钢-半固态铝合金界面与铝合金基体的断裂韧性进行了比较.研究结果表明：采用三点弯曲实验方法,可以显著降低界面裂纹尖端的复杂应力水平;半固态连接不锈钢-半固态铝合金界面断裂为典型的脆性断裂,界面临界断裂韧性略低于基体铝合金的断裂韧性.
|
| 关 键 词： | 半固态连接 双金属材料 界面断裂 三点弯曲 断裂韧性 |
| 文章编号： | 1673-2812(2007)02-0172-03 |
| 修稿时间： | 2006-05-18 |
Analysis of Fracture Properties on Bonding Interface of Semi Solid Joining Stainless Steel-aluminum AHoy Clad |
| |
| LIU Hong-wei,GUO Cheng,CHENG Yu,LIU Xu-feng,SHAO Guang-jie. Analysis of Fracture Properties on Bonding Interface of Semi Solid Joining Stainless Steel-aluminum AHoy Clad[J]. Journal of Materials Science and Engineering, 2007, 25(2): 172-174 |
| |
| Authors: | LIU Hong-wei GUO Cheng CHENG Yu LIU Xu-feng SHAO Guang-jie |
| |
| Abstract: | The clad material of stainless steel and aluminum alloy is fabricated by semi solid joining method,according with ASTM-E813,three point bending test is carried out,and the fracture behavior of bonding interface is studied with FEM and theory analysis.The results show that the level of compound stress is relived with the three point bending method,brittle fracture occurs at the clad interface and fracture toughness of the interface is slightly lower than that of the bulk aluminum alloy. |
| |
| Keywords: | semi solid joining clad interfacial fracture three point bending fracture toughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
