| 单片机控制的多量程位移数显仪 |
| |
| 引用本文： | 周玲,苏世栋.单片机控制的多量程位移数显仪[J].探测与控制学报,2011(4):64-66,71. |
| |
| 作者姓名： | 周玲 苏世栋 |
| |
| 作者单位： | 运城学院物理与电子工程系; |
| |
| 基金项目： | 山西省高等学校科技开发项目资助(20101124) |
| |
| 摘 要： | 在机械产品微小位移高精度检测显示中,针对所选位移传感器量程的不同而给检测结果的显示带来不便的问题,设计了单片机控制的多量程位移数显仪。采用4.5位A/D转换器将电感位移传感器信号变送电路输出的直流信号转换成数字信号,由软件实现多量程转换并显示对应的位移量。通过对不同量程的螺管式电感位移传感器的测试,结果表明:多量程位移数字显示精度优于1μm,与目前常用的单量程数显仪相比,具有精度高、使用方便等优点。
|
| 关 键 词： | 单片机 数字显示仪 多量程转换 |
Multi-range Displacement Digital Display Based on MCU |
| |
| ZHOU Ling,SU Shidong.Multi-range Displacement Digital Display Based on MCU[J].Journal of Detection & Control,2011(4):64-66,71. |
| |
| Authors: | ZHOU Ling SU Shidong |
| |
| Affiliation: | ZHOU Ling,SU Shidong(Department of Physics and Electronic Engineering,Yuncheng University,Yuncheng 044000,China) |
| |
| Abstract: | Of the high precision measurement and display for micro displacement of machinery production,the displacement sensors of different range will cause inconvenience on display.For this reason,a multi-range displacement digital display based on MCU was designed.The DC voltage from signal modulation circuit was conversed to digital signal by 4.5 ADC,and then the digital signal of multi-range displacement was transformed into corresponding scale displacement by software,finally displayed by LED.The experiment stu... |
| |
| Keywords: | MCU digital display multi-range conversion |
| 本文献已被 CNKI 等数据库收录！ |
|
