| 氧化铝粉体及混杂纤维改性树脂基复合材料的摩擦磨损性能 |
| |
| 引用本文： | 王世锋,王焕平,张斌,周广淼,徐时清.氧化铝粉体及混杂纤维改性树脂基复合材料的摩擦磨损性能[J].非金属矿,2010,33(6). |
| |
| 作者姓名： | 王世锋 王焕平 张斌 周广淼 徐时清 |
| |
| 作者单位： | 中国计量学院材料科学与工程学院,浙江,杭州,310018 |
| |
| 基金项目： | 教育部新世纪优秀人才支持计划，浙江省科技计划 |
| |
| 摘 要： | 通过在液态酚醛树脂溶液中引入不同粒径的CuO-TiO2低温烧结氧化铝陶瓷粉体、陶瓷-芳纶-金属混杂纤维以及硅烷偶联剂,探讨了陶瓷粉体、混杂纤维以及偶联剂等对树脂基复合材料摩擦因数与磨损率的影响规律。结果发现,粗大氧化铝陶瓷颗粒的引入,有助于提高树脂基复合材料的摩擦因数并降低其磨损率;将Ti/Cu摩尔比为4.0的低温烧结氧化铝粉体引入到酚醛树脂中,可获得摩擦因数0.54、磨损率0.22×10-7cm3/N·m的良好摩擦性能;适量硅烷偶联剂的添加能有效提高摩擦因数并降低磨损率,过量的陶瓷粉体与混杂纤维虽然可以提高摩擦因数,但因造成树脂相对含量的减少而使得复合材料的整体结合力变小,从而恶化了复合材料的耐磨损性能。
|
| 关 键 词： | 摩擦材料 氧化铝 混杂纤维 酚醛树脂 硅烷偶联剂 |
Friction and Wear Performances of Resin-based Composites Modified by Al_2O_3 Powders and Hybrid Fibers |
| |
| Wang Shifeng,Wang Huanping,Zhang Bin,Zhou Guangmiao,Xu Shiqing.Friction and Wear Performances of Resin-based Composites Modified by Al_2O_3 Powders and Hybrid Fibers[J].Non-metallic Mines,2010,33(6). |
| |
| Authors: | Wang Shifeng Wang Huanping Zhang Bin Zhou Guangmiao Xu Shiqing |
| |
| Affiliation: | Wang Shifeng Wang Huanping Zhang Bin Zhou Guangmiao Xu Shiqing(College of Materials Science and Engineering,China Jiliang University,Hangzhou,Zhejiang 310018) |
| |
| Abstract: | Through adding Al2O3 powders doped with CuO-TiO2 sintering aids,hybrid fibers and siloxane coupling agent into liquid state phenol-formaldehyde resin,the friction and wear performances of resin-based composites have been investigated.It was found that the friction coefficient of resin-based composite materials was improved and the wear rate was decreased by introduction of coarse Al2O3 particles.Adding Al2O3 ceramic powders doped with 2 wt% CuO-TiO2 sintering aids(the molar ratio of TiO2 to CuO was 4.0),the... |
| |
| Keywords: | friction material Al2O3 powders hybrid fibers phenol-formaldehyde resin siloxane coupling agent |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
