|
|||||
|
|
| 液相烧结金属陶瓷覆层/钢基体结合强度的研究 | |
| 引用本文： | 刘福田,李兆前,黄传真,常钧,芦令超,程新.液相烧结金属陶瓷覆层/钢基体结合强度的研究[J].机械工程材料,2003,27(8):27-30. |
| 作者姓名： | 刘福田 李兆前 黄传真 常钧 芦令超 程新 |
| 作者单位： | 1. 济南大学材料科学与工程学院,山东,济南,250022;山东大学机械工程学院,山东,济南,250061 2. 山东大学机械工程学院,山东,济南,250061 3. 济南大学材料科学与工程学院,山东,济南,250022 |
| 基金项目： | 国家自然科学基金资助项目(59975054) |
| 摘 要： | 根据液相烧结三元硼化物基金属陶瓷覆层材料的工艺特点，用金属陶瓷覆层将两钢板进行液相烧结连结，以覆层对两钢板的连结强度表征覆层与钢基体的结合强度。采用三点弯曲、拉伸和单边剪切三种方法进行覆层／钢基体结合强度的测试。结果表明，三元硼化物基金属陶瓷覆层／钢基体之间产生冶金结合，具有较高的结合强度。 |
| 关 键 词： | 金属陶瓷覆层 钢基体 液相烧结 结合强度 结合界面 |
| 文章编号： | 1000-3738(2003)08-0027-04 |
| 修稿时间： | 2002年11月4日 |
Bonding Strength of Liquid Phase Sintered Cermet Cladding Material |
|
| Abstract: | According to the technological characteristic of liquid phase sintered ternary boride based cermet cladding material, two steel plates were bonded using cermet cladding material by liquid phase sintering. The bonding strength between cermet cladding and steel substrate was expressed using the bonding strength of two bonded steel plates bonded by cermet cladding material. The bonding strength between cermet cladding and steel substrate was tested using the methods of bending, tension and shearing. Experimental results showed that metallurgical bonding was produced and strong bonding was possessed between cermet cladding and steel substrate in liquid phase sintered ternary boride based cermet cladding material. |
| Keywords: | cermet cladding steel substrate liquid phase sintering bonding strength bonding interface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |