Amenability for processing of oolitic iron ore concentrate for phosphorus removal |
| |
Affiliation: | 1. Laboratory of Process Metallurgy Research Group, Process and Environmental Engineering Department, University of Oulu, Finland;2. Mineral Processing and Agglomeration Laboratory, Central Metallurgical Research and Development Institute, Cairo, Egypt;1. CSIRO Land and Water Flagship, Wembley, WA, Australia;2. CSIRO Minerals Resources Flagship, Clayton South, VIC, Australia |
| |
Abstract: | Beneficiation routes aimed at dephosphorisation of oolitic gravity magnetic concentrate and involving a combination of roasting, re-grinding, magnetic separation and water and acid leaching are investigated. Roasting was carried out at 900 °C for 1 h without or with lime or sodium hydroxide as roasting additives. When additives were used, cement phases of Si–Al–Na–Ca–O type were detected as well as the mineral giuseppettite. During the thermal process sodium silicate is liquefied and the newly formed phases coat the oolites and penetrate inside the cracks. Energy Dispersive Spectroscopy analysis has indicated that the zone surrounding the oolites consists of Na, Al and Si phases with part of phosphorus being captured there. As a result of the alkaline roasting, goethite is partly transformed to magnetite and this reduction is reinforced with an increase in sodium hydroxide dosage. Investigation of redistribution of phosphorous shows that it could be only partly separated if leaching is not accompanied by re-grinding and physical separation. The recommended dosage of the reductive agent for the final flowsheet is 8 mass% ratio to concentrate. Grinding to a mean size of 0.040 mm, with water and acid leaching and double magnetic separation creates conditions to obtain a high-quality iron concentrate with 65.97% Fe and recovery of 92.43%, with simultaneous decrease in the phosphorus content from 0.71% to 0.05%. |
| |
Keywords: | Iron ore Phosphorus removal Roasting Leaching |
本文献已被 ScienceDirect 等数据库收录! |
|