Stability of long unsupported twin circular tunnels in soils

The stability of two long unsupported circular parallel tunnels aligned horizontally in fully cohesive and cohesive–frictional soils has been determined. An upper bound limit analysis in combination with finite elements and linear programming is employed to perform the analysis. For different clear spacing (S) between the tunnels, the stability of tunnels is expressed in terms of a non-dimensional stability number (γ_maxH/c); where H is tunnel cover, c refers to soil cohesion, and γ_max is maximum unit weight of soil mass which the tunnels can bear without any collapse. The variation of the stability number with tunnels’ spacing has been established for different combinations of H/D, m and ?; where D refers to diameter of each tunnel, ? is the internal friction angle of soil and m accounts for the rate at which the cohesion increases linearly with depth. The stability number reduces continuously with a decrease in the spacing between the tunnels. The optimum spacing (S_opt) between the two tunnels required to eliminate the interference effect increases with (i) an increase in H/D and (ii) a decrease in the values of both m and ?. The value of S_opt lies approximately in a range of 1.5D–3.5D with H/D = 1 and 7D–12D with H/D = 7. The results from the analysis compare reasonably well with the different solutions reported in literature.