| 锥形卡环多工位级进模设计 |
| |
| 引用本文： | 郭晓. 锥形卡环多工位级进模设计[J]. 模具工业, 2010, 36(1): 44-46 |
| |
| 作者姓名： | 郭晓 |
| |
| 作者单位： | 广东省技师学院,广东,惠州,516100 |
| |
| 摘 要： | 介绍了锥形卡环的成形工艺、零件排样和模具结构,对模具主要零件结构设计要点进行了阐述。模具结构紧凑、合理,生产的零件质量良好。
|
| 关 键 词： | 锥形卡环 排样 侧冲 级进模 |
Development of multi-position progressive die for cone-shaped retaining ring |
| |
| GUO Xiao. Development of multi-position progressive die for cone-shaped retaining ring[J]. Die & Mould Industry, 2010, 36(1): 44-46 |
| |
| Authors: | GUO Xiao |
| |
| Affiliation: | Guangdong Province Technician College/a>;Huizhou/a>;Guangdong 516100/a>;China |
| |
| Abstract: | The stamping process of a cone-shaped retaining ring was analyzed.The layout design,the structure of a progressive die for the shaping and the plan of main die parts were presented. |
| |
| Keywords: | cone-shaped retaining ring layout design side punching progressive die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
