| 一种低毁伤玻璃切割器的实验研究 |
| |
| 引用本文： | 肖勇,彭加斌,李哲雨,张建峰. 一种低毁伤玻璃切割器的实验研究[J]. 火工品, 2016, 0(5): 6-9. DOI: 10.3969/j.issn.1003-1480.2016.05.002 |
| |
| 作者姓名： | 肖勇 彭加斌 李哲雨 张建峰 |
| |
| 作者单位： | 陕西应用物理化学研究所，陕西 西安，710061 |
| |
| 摘 要： | 为获得一种低毁伤玻璃切割器,通过模拟毁伤实验,采用3种不同装药结构的玻璃切割器分别对车辆用双层夹胶玻璃(长2.0m×高1.5m×厚9.0mm)进行切割。实验结果显示:A型切割器能切割掉双层夹胶玻璃,但对人员造成的伤害较大;B型切割器的毁伤性最小,但未能切割掉双层夹胶玻璃;C型切割器不仅能切割掉双层夹胶玻璃,同时对人员毁伤性较小。
|
| 关 键 词： | 切割器 车辆玻璃 聚能切割索 火药 毁伤 |
Experimental Study on A Low Damage Glass Cutter |
| |
| Abstract: | To obtain the glass cutter with low damage, three types of glass cutter were selected to cut double-deck laminated glass (length 2m*height 1.5m*thickness 9mm) for vehicles, according to simulation damage experiment. The experiment result shows that the type A cutter can accomplish cutting, while causes bad damage to people, type B cutter has the lowest damage, but it cannot finish cutting, type C can not only accomplish cutting, but also has low damage to people. |
| |
| Keywords: | Cutter Vehicle glass Jet cutting cord Propellant Damage |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
