基于轧件水平振动的轧机辊系振动补偿模型

考虑轧件水平振动对轧制力和摩擦力动态特性的影响,建立了一种基于轧件水平振动的轧机辊系振动补偿模型。根据广义耗散的Lagrange原理,分别沿轧制方向和垂直轧制方向建立动力学平衡方程。以某厂四辊板带轧机为例,仿真分析轧件水平振动速度和轧机辊系垂直振动位移随轧辊转速的变化规律,测试了5组不同转速下的轧制力数据;对模型补偿前后轧制力理论值与测试数据误差进行了对比。研究结果表明:补偿后的模型轧制力理论值与实测数据之间的误差大大减小。

Compensative Vibration Model of Roll System Based on Horizontal Vibration of Rolled Piece

Considering the influence to the dynamic characteristics of rolling force and rolling friction from horizontal vibration of rolled piece, a compensative vibration model of roll system is established. According to the Lagrange principle of generalized dissipation, dynamic equilibrium equation is established respectively both in rolling direction and in vertical direction. With four-high strip mill of a factor as an example, simulating and analyzing the horizontal vibration velocity of rolled piece and the vibration displacement of roll under different rolling speeds. Five sets of rolling force data at different rolling speeds are obtained. Finally, the theoretical values of rolling force and the test data are compared with the model before and after optimization. Research results show that: the calculated values of the rolling force after optimization are far more close to the actual working condition;