首页 | 本学科首页   官方微博 | 高级检索  
     

广东省引进燃气-蒸汽联合循环机组的必要性及机组性能分析
引用本文:洪晖虹,陈勇.广东省引进燃气-蒸汽联合循环机组的必要性及机组性能分析[J].广东电力,2006,19(5):6-10,21.
作者姓名:洪晖虹  陈勇
作者单位:[1]广东省粤电集团有限公司,广州510008 [2]珠海发电厂,广东珠海519050
摘    要:阐述了广东省引进燃气-蒸汽联合循环机组的必要性。以及该类型机组的燃料供应问题。通过与常规火力发电机组比较,分析了燃气-蒸汽联合循环机组在效率、环境保护、耗水量等方面的优越性。针对现今国际上的主导机型-F级燃气-蒸汽联合循环机组,就机组性能和结构优化配置方案进行了分析比较。认为:F级燃气轮机适于建造联合循环机组;作为两班制的调峰机组,单轴机组比多轴机组更具优势。

关 键 词:F级燃气轮机  燃气-蒸汽联合循环  单轴  多轴
文章编号:1007-290X(2006)05-0006-05
收稿时间:2005-12-31
修稿时间:2005-12-31

Necessity of developing gas-steam combined cycle units in Guangdong and performance analysis of the units
HONG Hui-hong, CHEN Yong.Necessity of developing gas-steam combined cycle units in Guangdong and performance analysis of the units[J].Guangdong Electric Power,2006,19(5):6-10,21.
Authors:HONG Hui-hong  CHEN Yong
Affiliation:1. Guangdong Yudean Group Co,. Ltd.. Guangzhou 510008. China; 2. Zhuhai Power Station. Zhuhai. Guangdong 519050, China
Abstract:This paper expounds the necessity of developing gas-steam combined cycle units in Guangdong, China as well as the fuel supply for this kind of units. Through the comparison with conventional thermal generator sets, the superiorities of gas-steam combined cycle units in efficiency, environmental protection, water consumption, etc. are analyzed. In light of the internationally dominant F-class gas-steam combined cycle units, a comparative analysis is made of the unit performance and configuration optimization scheme. It is concluded that F-class gas turbines arc suitable for combined cycle units, and single-shaft units are superior to multi-shaft ones as two-shift peaking units.
Keywords:F-class gas turbine  gas-steam combined cycle  single-shaft  multi-shaft
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号