Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells |
| |
Authors: | Yong LuoFang Zhang Bin WeiGuangli Liu Renduo ZhangBruce E. Logan |
| |
Affiliation: | a School of Environmental Science and Engineering, Sun Yat-Sen University, Guangzhou, Guangdong 510275, China b Department of Civil and Environmental Engineering, Penn State University, 231 Q Sackett Building, University Park, PA 16802, USA |
| |
Abstract: | An inexpensive carbon material, carbon mesh, was examined to replace the more expensive carbon cloth usually used to make cathodes in air-cathode microbial fuel cells (MFCs). Three different diffusion layers were tested using carbon mesh: poly(dimethylsiloxane) (PDMS), polytetrafluoroethylene (PTFE), and Goretex cloth. Carbon mesh with a mixture of PDMS and carbon black as a diffusion layer produced a maximum power density of 1355 ± 62 mW m−2 (normalized to the projected cathode area), which was similar to that obtained with a carbon cloth cathode (1390 ± 72 mW m−2). Carbon mesh with a PTFE diffusion layer produced only a slightly lower (6.6%) maximum power density (1303 ± 48 mW m−2). The Coulombic efficiencies were a function of current density, with the highest value for the carbon mesh and PDMS (79%) larger than that for carbon cloth (63%). The cost of the carbon mesh cathode with PDMS/Carbon or PTFE (excluding catalyst and binder costs) is only 2.5% of the cost of the carbon cloth cathode. These results show that low cost carbon materials such as carbon mesh can be used as the cathode in an MFC without reducing the performance compared to more expensive carbon cloth. |
| |
Keywords: | Carbon mesh Microbial fuel cell Polytetrafluoroethylene (PTFE) Poly(dimethylsiloxane) (PDMS) Low cost |
本文献已被 ScienceDirect 等数据库收录! |
|