| 工艺参数对SL原型钛合金快速离心精铸充填率的影响 |
| |
| 引用本文： | 张敏华,屈银虎.工艺参数对SL原型钛合金快速离心精铸充填率的影响[J].热加工工艺,2008,37(1):18-21. |
| |
| 作者姓名： | 张敏华 屈银虎 |
| |
| 作者单位： | 1. 西安航空职业技术学院,陕西,西安,710089
2. 西安工程大学,陕西,西安,710048 |
| |
| 摘 要： | 通过栅格试样浇注实验研究了工艺参数对基于SL原型钛合金立式离心快速精密铸造充填率的影响.试验结果表明,试样铸件厚度越大,离心半径越大,离心转速越高,铸件型壳的充填率越高.同时通过离心加速度综合分析了离心半径和离心转速对充型率的影响,当离心加速度大于某一临界值时,即可充填满不同厚度的试样,且试样越厚,充填满试样所需的临界离心加速度越小.
|
| 关 键 词： | 快速精铸 立式离心铸造 SL原型 钛合金 |
| 文章编号： | 1001-3814（2008）01-0018-04 |
| 收稿时间： | 2007-07-12 |
| 修稿时间： | 2007年7月12日 |
Effect of Process Parameter on Filling Ratio of Quick Precision Centrifugal Casting Based on SL Prototype for Titanium Alloy |
| |
| ZHANG Minhua,QU Yinhu.Effect of Process Parameter on Filling Ratio of Quick Precision Centrifugal Casting Based on SL Prototype for Titanium Alloy[J].Hot Working Technology,2008,37(1):18-21. |
| |
| Authors: | ZHANG Minhua QU Yinhu |
| |
| Abstract: | The effect of process parameter on filling ratio of vertical centrifugal quick precision casting based on SL prototype for Ti Alloy was researched by casting experiment of grid specimens. The results show that the greater casting thickness, mtating speed and radius of centrifugal casting are, the greater the filling ratio are. The effect of rotating speed and radius of centrifugal casting on the filling ratio are analysed comprehensively by centrifugal acceleration, when the centrifugal acceleration are greater than certain critical quantity, the filling ratio of the grid specimens would reach 100%, and the greater the thickness of grid specimens are, the smaller the critical quantity of centrifugal acceleration that make the filling ratio of the grid specimens reach 100% are. |
| |
| Keywords: | quick precision casting vertical centrifugal casting SL prototype Ti alloy |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
