| 涡流发生器强化直接空冷单排管换热的数值模拟 |
| |
| 引用本文： | 杨来顺,周国兵.涡流发生器强化直接空冷单排管换热的数值模拟[J].现代电力,2011,28(2):53-57. |
| |
| 作者姓名： | 杨来顺 周国兵 |
| |
| 作者单位： | 华北电力大学能源动力与机械工程学院,北京,102206 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金项目，中央高校基本科研业务费专项基金，中国电机工程学会电力青年科技创新项目 |
| |
| 摘 要： | 为了验证新型涡流发生器(柱面梯形翼)对直接空冷凝汽器单排管的换热有一定的强化作用,利用FLUENT6.3商业软件对安装柱面梯形翼的单排蛇形翅片扁管空气侧换热及流动特性进行了三维数值模拟。结果表明,Re数在300~900的范围内,与未安装涡流发生器的单排蛇形翅片扁管相比,带柱面梯形翼的翅片扁管的平均Nu数增大了123%,摩擦因子增大了111%,其综合换热性能(Nu/f)最多提高5.65%,这说明柱面梯形翼对翅片扁管有强化传热的作用。在模拟过程中,对实际直接空冷凝汽器蛇形翅片单排扁管进行了一定程度的简化,将计算区域按照翅片扁管的对称性尽可能缩小。并将数值模拟的结果进行了网格独立性验证,表明模拟结果的可靠性。
|
| 关 键 词： | 涡流发生器 直接空冷 单排管 强化传热 数值模拟 |
Numerical Simulation on Heat Transfer Enhancement of Direct Air-cooled Single-row Tube with Vortex Generators |
| |
| Yang Laishun,Zhou Guobing.Numerical Simulation on Heat Transfer Enhancement of Direct Air-cooled Single-row Tube with Vortex Generators[J].Modern Electric Power,2011,28(2):53-57. |
| |
| Authors: | Yang Laishun Zhou Guobing |
| |
| Affiliation: | Yang Laishun,Zhou Guobing(School of Energy,Power and Mechanical Engineering,North China Electric Power University,Beijing 102206,China) |
| |
| Abstract: | In order to verify the reinforcement to heat transfer of direct air-cooled single-row tubes using vortex generators,3-D numerical simulations are performed to investigate air-side heat transfer and flow characteristics of single-row wavy-finned flat tube with cylindrical-shell trapezoidal wing using FLUENT 6.3.The results show that with Re ranging from 300 to 900,the heat transfer performance(Nu) and friction factor of single-row wavy-finned flat tube is increased by 123% and 111% respectively,after the cyl... |
| |
| Keywords: | vortex generator direct air-cooled single-row tube heat transfer enhancement numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
