首页 | 本学科首页   官方微博 | 高级检索  
     

金属橡胶隔振器抗冲击性能研究
引用本文:夏宇宏,姜洪源,魏浩东,闫辉,А.М.Уланов. 金属橡胶隔振器抗冲击性能研究[J]. 振动与冲击, 2009, 28(1): 72-75. DOI:  
作者姓名:夏宇宏  姜洪源  魏浩东  闫辉  А.М.Уланов
作者单位:1. 哈尔滨工业大学机电工程学院,哈尔滨 150001;2. 萨马拉国立航空航天大学飞行器发动机系,萨玛拉443086, 俄罗斯
摘    要:对金属橡胶隔振器的冲击性能进行了理论和实验研究。借助于金属橡胶构件的加载曲线和迟滞回线,研究了具有非线性干摩擦阻尼隔冲系统在短冲击和长冲击时的最大响应的计算方法,并借助于Matlab实现了最大冲击响应的逐步积分计算。通过实验研究了构件结构形状和参数、负载质量、冲击加速度等对金属橡胶构件抗冲击性能的影响,对理论方法进行了验证,为工程实践提供了依据。

关 键 词:金属橡胶隔振器   冲击响应   数值计算   实验研究   
收稿时间:2007-08-08
修稿时间:2008-04-21

Shock protection characteristics of metal rubber isolators
XIA Yu-hong,JIANG Hong-yuan,WEI Hao-dong,YAN Hui,А.М.Уланов
. Shock protection characteristics of metal rubber isolators[J]. Journal of Vibration and Shock, 2009, 28(1): 72-75. DOI:  
Authors:XIA Yu-hong  JIANG Hong-yuan  WEI Hao-dong  YAN Hui  А.М.Уланов
Affiliation:1. School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150001, China;2. Department of Aircraft Engine, Samara State Aerospace University, Samara 443086 Russia
Abstract:The shock protection characteristics of Metal Rubber isolator are studied theoretically and experimentally. Based on the primary loading line and the hysteresis loops of isolators, the calculation method of maximum response of nonlinear shock protection system with dry friction damping on the short and long shock impulses is proposed. The stepping integration of the maximum response is programmed by using Matlab software. The effects of the structural parameters, the load, and the shock acceleration level on the shock protection performance of metal rubber isolators are researched experimentally to testify the theoretical calculation method. The results are beneficial to the engineering application of metal rubber isolators.
Keywords:metal rubber isolator  shock response  numerical calculation  experimental research
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《振动与冲击》浏览原始摘要信息
点击此处可从《振动与冲击》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号