Preparation and Properties of Ethylene Vinyl Acetate (EVA)/Organoclay/Compatibilizer Nanocomposites: Effects of Organoclay Loading and Methyl Ethyl Ketone

Ethylene vinyl acetate (EVA)/organoclay/compatibilizer nanocomposites were produced using a melt compounding technique in an internal mixer, Haake Rheometer, at 120°C and 50 rpm rotor speed. Effects of organoclay loading (from 2 to 10 phr—parts per hundred of resin and methyl ethyl ketone (MEK), used as a compatibilizer, on the processing properties, tensile properties, morphology, thermal degradation, and water absorption behavior of EVA/organoclay nanocomposites were studied. Results indicate that the presence of organoclay increase the processing torque, tensile properties, thermal degradation, and resistance to water absorption. The optimum organoclay loading was achieved at 2 phr. This was caused by the dispersion state of individual silicate layers (intercalation/exfoliation) in EVA matrix. The intercalation/exfoliation structure affects the properties of EVA/organoclay nanocomposites as evidenced from the morphology studies such as x-ray diffraction (XRD) and transmission electron microscopy (TEM) evaluation. The addition of MEK has the ability to improve the tensile properties, thermal degradation, and slightly reduces the resistance of water permeation of EVA/organoclay nanocomposites. The enhanced properties were seen as a result of the better matrix and filler interaction. The EVA/organoclay/MEK nanocomposites shows better intercalation/exfoliation of individual silicate layers in the EVA matrix as indicated by TEM. Moreover, the XRD evaluation shows that intercalation/exfoliation of the organoclay was formed in the EVA matrix.