|
|||||
|
|
| 电催化金属辅助化学刻蚀法制备硅纳米线/多孔硅复合结构 | |
| 引用本文： | 陈力驰,王耀功,王文江,麻晓琴,杨静远,张小宁.电催化金属辅助化学刻蚀法制备硅纳米线/多孔硅复合结构[J].无机材料学报,2021,36(6):608-614. |
| 作者姓名： | 陈力驰 王耀功 王文江 麻晓琴 杨静远 张小宁 |
| 作者单位： | 1.西安交通大学 电子物理与器件教育部重点实验室, 西安 710049 2.西安交通大学 电子科学与工程学院, 西安 710049 3.生态环境部核与辐射安全中心, 北京 100082 |
| 基金项目： | 国家自然科学基金(51807156);国家自然科学基金(61771382);陕西省国际合作计划项目(2018KW-034);陕西省博士后基金(2018BSHYDZZ22) |
| 摘 要： | 量子限制效应使硅纳米线具有良好的场致发射特性,结合多孔硅的准弹道电子漂移模型可提高场发射器件的性能.传统的金属辅助化学刻蚀法制备硅纳米线的效率较低,本研究在传统方法的基础上引入恒流源,提出电催化金属辅助化学刻蚀法,高效制备了硅纳米线/多孔硅复合结构.在外加30 mA恒定电流的条件下,硅纳米线的平均制备速率可达308 n... |
| 关 键 词： | 电化学 金属辅助化学刻蚀法 硅纳米线 多孔硅 场发射 |
| 收稿时间： | 2020-09-01 |
| 修稿时间： | 2020-10-12 |
Preparation of Silicon Nanowires and Porous Silicon Composite Structure by Electrocatalytic Metal Assisted Chemical Etching |
|
| CHEN Lichi,WANG Yaogong,WANG Wenjiang,MA Xiaoqin,YANG Jingyuan,ZHANG Xiaoning.Preparation of Silicon Nanowires and Porous Silicon Composite Structure by Electrocatalytic Metal Assisted Chemical Etching[J].Journal of Inorganic Materials,2021,36(6):608-614. | |
| Authors: | CHEN Lichi WANG Yaogong WANG Wenjiang MA Xiaoqin YANG Jingyuan ZHANG Xiaoning |
| Affiliation: | 1. Key Laboratory of Physical Electronics and Devices of the Ministry of Education, Xi’an Jiaotong University, Xi’an 710049, China 2. School of Electronic Science and Engineering, Xi’an Jiaotong University, Xi’an 710049, China 3. Nuclear and Radiation Safety Center, Beijing 100082, China |
| Abstract: | The quantum confinement effect brings good field emission characteristics to silicon nanowires, which is expected to improve the performance of field emission device through combination with the quasiballistic electrons drift model in porous silicon structure, but the efficiency of traditional metal assisted chemical etching is low. Constant current source was introduced on the basis of traditional metal assisted chemical etching in the present work, and a electrocatalytic metal assisted chemical etching method was proposed to achieve high-efficiency preparation of silicon nanowires and porous silicon composite structure. The preparation rate of silicon nanowires is 308 nm/min at 30 mA current, which is increased by 173% compared with that adopted the traditional method. Moreover, the effects of AgNO3 concentration, etching time and etching current on the morphology of the composite structure were investigated. The field emission characteristics of the structure prepared by electrocatalytic metal assisted chemical etching were tested. The current density is 64 μA/cm2 under the electric field of 14.16 V/μm, and threshold electric field is 10.83 V/μm. |
| Keywords: | electrochemistry metal assisted chemical etching silicon nanowire porous silicon field emission |
| 本文献已被 CNKI 等数据库收录！ | |
| 点击此处可从《无机材料学报》浏览原始摘要信息 | |
| 点击此处可从《无机材料学报》下载全文 | |