首页 | 本学科首页   官方微博 | 高级检索  
     

基于最大测点正常率与GPU并行加速的不良数据辨识方法
引用本文:方睿,董树锋,唐坤杰,朱承治,裴湉,宋永华. 基于最大测点正常率与GPU并行加速的不良数据辨识方法[J]. 电力系统自动化, 2019, 43(16): 86-93
作者姓名:方睿  董树锋  唐坤杰  朱承治  裴湉  宋永华
作者单位:浙江大学电气工程学院,浙江省杭州市,310027;国网浙江省电力有限公司,浙江省杭州市,310007;澳门大学电机及电脑工程系,澳门
基金项目:国家电网公司科技项目(52110418000M)
摘    要:基于测量不确定度的概念,以测点正常率最大(MNMR)为目标的电力系统抗差状态估计方法具有较好的不良数据辨识能力。然而,该模型求解困难,已有研究对该模型进行了近似等效,并采用现代内点法进行求解,但存在因近似而辨识效果降低的问题。为此,基于MNMR状态估计模型,采用杂交变异粒子群算法,提出一种基于图形处理器(GPU)并行加速的不良数据辨识算法。该算法不对MNMR模型进行近似等效,根据GPU并行计算架构特点,设计了粗粒度和细粒度结合的并行加速策略。算例结果表明,所提的算法对不良数据的误检率和漏检率较低,具有较好的不良数据辨识能力,且计算时间短,加速效率高,能够满足实际运行需求。

关 键 词:数据辨识  状态估计  测点正常率  图形处理器  并行计算
收稿时间:2018-10-29
修稿时间:2019-06-13

Bad Data Identification Method Based on Maximum Normal Measurement Rate and GPU Parallel Acceleration
FANG Rui,DONG Shufeng,TANG Kunjie,ZHU Chengzhi,PEI Tian and SONG Yonghua. Bad Data Identification Method Based on Maximum Normal Measurement Rate and GPU Parallel Acceleration[J]. Automation of Electric Power Systems, 2019, 43(16): 86-93
Authors:FANG Rui  DONG Shufeng  TANG Kunjie  ZHU Chengzhi  PEI Tian  SONG Yonghua
Affiliation:College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China,College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China,College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China,State Grid Zhejiang Electric Power Co. Ltd., Hangzhou 310007, China,State Grid Zhejiang Electric Power Co. Ltd., Hangzhou 310007, China and Department of Electrical and Computer Engineering, University of Macau, Macau, China
Abstract:Based on the concept of measurement uncertainty, the robust state estimation method for power system with maximum normal measurement rate(MNMR)has good identification ability of bad data. However, the model is difficult to solve. In existing researches, the model is approximated and solved by the modern interior point method, but the problems such as lower identification effect due to approximation are existed. Therefore, based on the state estimation model of MNMR, a hybrid particle swarm optimization(PSO)algorithm with hybrid mutation is used to propose a bad data identification algorithm based on graphics processing unit(GPU)parallel acceleration. Without approximating the MNMR model and according to the architecture characteristics of the GPU parallel compution, the algorithm designs a parallel acceleration strategy combining coarse and fine granularity. The results of the case analysis show that the proposed algorithm has low false detection rate and missed detection rate for bad data, and has good identification ability of bad data, short calculation time and high acceleration efficiency, which could meet the actual operation requirements.
Keywords:data identification   state estimation   normal measurement rate   graphics processing unit (GPU)   parallel compution
本文献已被 万方数据 等数据库收录!
点击此处可从《电力系统自动化》浏览原始摘要信息
点击此处可从《电力系统自动化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号