| 一机四锭低频电磁铸造铝合金理论研究 |
| |
| 引用本文： | 李建超,王宝峰,麻永林,崔建忠. 一机四锭低频电磁铸造铝合金理论研究[J]. 包头钢铁学院学报, 2009, 28(1) |
| |
| 作者姓名： | 李建超 王宝峰 麻永林 崔建忠 |
| |
| 作者单位： | 李建超,王宝峰,麻永林,LI Jian-chao,WANG Bao-feng,MA Yong-lin(内蒙古科技大学,材料与冶金学院,内蒙古,包头,014010);崔建忠,CUI Jian-zhong(东北大学,辽宁,沈阳,110004) |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)，内蒙古自治区自然科学基金 |
| |
| 摘 要： | 通过ANSYS有限元对四锭低频电磁铸造铝合金时,结晶器外套材料对铸锭内部磁感应强度的影响以及4个线圈之间磁场相互影响进行了数值模拟,结果表明,当结晶器外套为导磁材料A3钢时,可以增大铸锭内部的感应强度;对多流低频电磁铸造来说,推荐线圈之间的最佳距离为:相邻线圈电流方向相同,线圈之间的距离应大于30 mm.
|
| 关 键 词： | 低频电磁铸造 有限元 铝合金 结晶器 |
Theoretical research on four-frequency electromagnetic field |
| |
| LI Jian-chao,WANG Bao-feng,MA Yong-lin,CUI Jian-zhong. Theoretical research on four-frequency electromagnetic field[J]. Journal of Baotou University of Iron and Steel Technology, 2009, 28(1) |
| |
| Authors: | LI Jian-chao WANG Bao-feng MA Yong-lin CUI Jian-zhong |
| |
| Affiliation: | 1.Material and Metallurgy School;Inner Mongolia University of Science and Technology;Baotou 014010;China;2.Northeastern University;Shenyang 110004;China |
| |
| Abstract: | With the aid of FE code ANSYS,the effect of different mould exterior part material on magnetic flux density in the aluminum melt and magnetic field interaction of four coils applied with same current were investigated.Calculated results show that magnetic flux density in the aluminum melt is greatly improved.For the four-ingot low frequency electromagnetic casting aluminum alloy,the optimal distance between two nearby coils should be more than 30 mm in the same coil current direction. |
| |
| Keywords: | low-frequency electromagnetic casting finite element method aluminum alloy mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
