| 共混方式对高密度聚乙烯/聚碳酸酯共混体系形态与性能的影响 |
| |
| 引用本文： | 郑学晶,杨鸣波,李忠明,冯建民,江宗正,周德.共混方式对高密度聚乙烯/聚碳酸酯共混体系形态与性能的影响[J].塑料工业,1999,27(1). |
| |
| 作者姓名： | 郑学晶 杨鸣波 李忠明 冯建民 江宗正 周德 |
| |
| 作者单位： | 四川联合大学塑料工程系,成都,610065 |
| |
| 基金项目： | 国家产学研高技术产业化资助项目 |
| |
| 摘 要： | 研究了不同共混方式对高密度聚乙烯（ＨＤＰＥ）／聚碳酸酯（ＰＣ）共混体系形态与性能的影响。将不同组成的ＨＤＰＥ／ＰＣ分别在双螺杆、单螺杆挤出机中共混后注射成型，测试注射样条的力学性能并用扫描电子显微镜（ＳＥＭ）对样条断面进行形态观察。结果发现，共混方式对共混体系拉伸强度影响不大，但对冲击强度和断面形态影响较大。当ＰＣ含量低时，双螺杆的共混效果不如单螺杆；当ＰＣ含量较高时，双螺杆的共混效果优于单螺杆。
|
| 关 键 词： | 共混体系 共混方式 形态 性能 |
Effects of Blending Method on Morphology and Properties of HDPE/PC Blend |
| |
| Zheng Xuejing,Yang Mingbo,Li Zhongming,Feng Jianming,Jiang Zongzheng,Zhou De.Effects of Blending Method on Morphology and Properties of HDPE/PC Blend[J].China Plastics Industry,1999,27(1). |
| |
| Authors: | Zheng Xuejing Yang Mingbo Li Zhongming Feng Jianming Jiang Zongzheng Zhou De |
| |
| Abstract: | The effects of blending method on the morphology and properties of HDPE/PC blend were studied. The mechanical properties of HDPE/PC blended by twin and single screw extruders were tested.The morphology of the sample was investigated by scanning electron microscope (SEM).The results showed different blending methods had little effects on tensile strength of the blends,but obvious effects on notched impact strength and morphology.The blending efficiency of twin screw extruder was not as good as that of single screw extruder at low PC concentration. However,when PC content was high,the blending efficiency of twin screw extruder was better than that of single screw extruder. |
| |
| Keywords: | Blend System Blending Method Morphology Property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
