| 高温蒸养对粉煤灰水泥基材料水化产物结构的影响 |
| |
| 引用本文： | 徐子芳,张明旭,朱金波. 高温蒸养对粉煤灰水泥基材料水化产物结构的影响[J]. 材料热处理学报, 2011, 32(8) |
| |
| 作者姓名： | 徐子芳 张明旭 朱金波 |
| |
| 作者单位： | 安徽理工大学材料科学与工程学院,安徽淮南,232001 |
| |
| 基金项目： | 国家自然基金项目(10872001); 安徽理工大学博士基金项目(2010yc001) |
| |
| 摘 要： | 运用基本力学及导热系数测定实验系统对高温蒸养作用后的粉煤灰水泥基材料的抗压强度和热导率进行了试验研究,并借助于X射线衍射（XRD）、扫描电镜（SEM）和热重-差热分析（TG-DTA）等手段对水化产物的微观结构对其宏观性能的决定性机理进行了分析。结果表明：随蒸养温度的增加,粉煤灰水泥基材料的强度和保温性能均增强。钙矾石（AFt）转变为单硫型水化硫铝酸钙（AFm）,粉煤灰释放珠状的铝、硅成分形成莫来石,水化产物失水后重新结合,晶相、晶形稳定性增强是蒸养后强度及保温性能增强的主要原因。
|
| 关 键 词： | 蒸养 粉煤灰水泥基材料 水化产物 微观结构 |
Effect of high temperature autoclaving curing on microstructure of hydration product for fly ash cement-based material |
| |
| XU Zi-fang,ZHANG Ming-xu,ZHU Jin-bo. Effect of high temperature autoclaving curing on microstructure of hydration product for fly ash cement-based material[J]. Transactions of Materials and Heat Treatment, 2011, 32(8) |
| |
| Authors: | XU Zi-fang ZHANG Ming-xu ZHU Jin-bo |
| |
| Affiliation: | XU Zi-fang,ZHANG Ming-xu,ZHU Jin-bo(School of Materials Science and Engineering,Anhui University of Science and Technology,Huainan 232001,China) |
| |
| Abstract: | Compressive strength and thermal conductivity of fly ash cement-based composite material after high temperature autoclaving curing were investigated with fundamental mechanical experiment and thermal conductivity testing system.The mechanism involved in the increasing of performance of the material was disscussed based on microstructure study of the hydration product by means of X-ray diffraction(XRD),scanning electron microscopy(SEM) and thermogravimetry/differential thermal analysis(TG/DTA).The results sh... |
| |
| Keywords: | autoclaving curing fly ash cement-based material hydration product microstructure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
