应用均衡凝固理论和压边浇冒口改进主滚轮的工艺 |
| |
引用本文: | 江礼贵.应用均衡凝固理论和压边浇冒口改进主滚轮的工艺[J].现代铸铁,2001(3):43-44. |
| |
作者姓名: | 江礼贵 |
| |
作者单位: | 三明双轮化工机械有限公司, |
| |
摘 要: | 分析了主滚轮传统铸造工艺的缺点,提出采用均衡凝固理论和压边浇冒口的工艺方法,防止铸件产生缩孔和缩松缺陷,效果显著。
|
关 键 词: | 主滚轮 缩孔 缩松 缺陷 压边浇冒口 铸造 硫化机 灰铸铁 |
文章编号: | 1003- 8345(2001)03- 0043- 02 |
修稿时间: | 2001年1月8日 |
Using Proportional Solidification Theory and Kiss Gating/Connor Feeder to Improve Foundry Method of Main Roller |
| |
Abstract: | The shortage of traditional foundry method of the main roller was analyzed.It was proposed to adopt proportional solidification theory and connor feeder.As a result,the shrinkage cavity and porosity was eliminated. |
| |
Keywords: | main roller shrinkage cavity porosity connor gating/feeder |
本文献已被 CNKI 维普 万方数据 等数据库收录! |