首页 | 本学科首页   官方微博 | 高级检索  
     

DMC补强EPDM/MVQ并用胶的性能研究
引用本文:武卫莉,陈大俊.DMC补强EPDM/MVQ并用胶的性能研究[J].橡胶工业,2007,54(2):88-92.
作者姓名:武卫莉  陈大俊
作者单位:1. 东华大学,材料学院,上海,200051;齐齐哈尔大学,化工学院,黑龙江,齐齐哈尔,161006
2. 东华大学,材料学院,上海,200051
摘    要:采用添加短纤维的不饱和聚酯(DMC)填充EPDM/基乙烯基硅橡胶(MVQ)并用胶。研究其物理性能和耐热老化性能。结果表明,添加DMC后。EPDM/MVQ并用胶的邵尔A型硬度和拉伸强度大幅提高,耐热老化性能较好,兼具EPDM,MVQ和DMC的优点。EPDM/MVQ并用胶的较优配方为:EPDM25,MVQ75,DMC80,白炭黑40,氧化锌5,防老剂D1,硫化剂DCP6,促进剂DM0.8。

关 键 词:甲基乙烯基硅橡胶  并用胶  不饱和聚酯  补强作用  耐热老化性能
文章编号:1000-890X(2007)02-0088-05
修稿时间:2006-09-19

Properties of DMC-reinforced EPDM/MVQ blend
WU Wei-li and CHEN Da-jun.Properties of DMC-reinforced EPDM/MVQ blend[J].China Rubber Industry,2007,54(2):88-92.
Authors:WU Wei-li and CHEN Da-jun
Affiliation:1. Donghua University,Shanghai 200051,Chinas2. Qiqihaer University,Qiqihaer 161006,China
Abstract:A DMC(a short fibre/unsaturated polyester composite)-reinforced EPDM/MVQ blend was prepared and its physical properties and aging properties were investigated.The results showed that the DMC-reinforced EPDM/MVQ blend combined the advantages of EPDM/MVQ with those of DMC,and possessed much higher Shore A hardness and tensile strength,and better thermal aging properties.The optimized formula of DMC-reinforced EPDM/MVQ blend was as follows:EPDM 25,MVQ 75,DMC 80,silica 40,ZnO 5,antioxidant D 1,curing agent DCP 6,accelerator DM 0.8.
Keywords:EPDM
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《橡胶工业》浏览原始摘要信息
点击此处可从《橡胶工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号