|
|||||
|
|
Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction |
|
| Authors: | Min-soo Suh Young-hun Chae Tatsuya Hinoki |
| Affiliation: | a Graduate School of Energy Science, Kyoto University, Gokasho, Uji, 611-0011 Kyoto, Japan b Engineering of Tribology Institute, Kyungpook National University, 1370 Sankyuk-dong, Buk-gu, 702-701 Daegu, Republic of Korea c Department of Mechanical Engineering, Kyungpook National University, 1370 Sankyuk-dong, Buk-gu, 702-701 Daegu, Republic of Korea d Institute of Advanced Energy, Kyoto University, Gokasho, Uji, 611-0011 Kyoto, Japan |
| Abstract: | Tribological test was carried out using a pin-on-disc geometry with textured SKD11 pin on bearing steel disc, under sliding in paraffin oil. Micro-grooved crosshatch pattern has been fabricated with various angles and widths. The effects of geometrical parameters on friction were mainly examined in mixed and elastohydrodynamic lubrication. The results show that friction control can be achieved by fabricating the micro-grooved crosshatch pattern on a contact surface. It is observed that each geometrical parameter of texture influence on friction, especially decrease of groove aspect ratio and increases of groove sliding length show friction reduction performance. Crucial parameter Gl was proposed for micro-grooved crosshatch texture. The friction mechanism is explained by micro fluid flow with limited theoretical approach. |
| Keywords: | Surface texture Sliding friction Elastohydrodynamic lubrication Fluid mechanics |
| 本文献已被 ScienceDirect 等数据库收录！ | |